Community Gallery

The Meshcast community

Makers and the things they printed, cast, and made, all designed in Meshcast. Tag your work to land here.

Post your make, get featured.

Upload a photo of what you made and add your Instagram handle. Once it is approved it joins the gallery below with your name on it, so other makers see your work.

Not on Pro? Your first photo also earns you 5 bonus downloads.

Something here that should not be? Report it and we review it promptly.

A grey 3D-printed figure of a child in a space helmet riding a rocket on a swirling wave, standing on the print bed between the two open halves of its mold. Made by @zevra.home.

A grey 3D-printed rabbit bust with a knitted scarf, dry-brushed white to show the detail, standing in front of the open white two-part mold printed for it. Made by @zevra.home.

A green 3D-printed two-part hydrangea mold held open, with the printed flower-ball master still sitting on its base plate.

A purple printed mold lid with MESHCAST embossed across it, held in front of the matching two-part bust molds and a white cast. Made by @punto3dperu.

A cream and a grey printed pope bust standing in front of the purple two-part molds and the white silicone negative they came from. Made by @punto3dperu.

A white silicone negative of a pope bust held up in front of the purple printed molds and the finished casts. Made by @punto3dperu.

Two purple two-part printed molds behind a grey pope bust on its printed base, with a cream cast on one side and the white silicone negative on the other. Made by @punto3dperu.

Both halves of a printed Game Boy mold laid out on a wooden bench, one still holding the grey cement cast.

A yellow two-part printed mold standing open behind the waving snowman master it was built around.

Black and yellow two-part molds laid out in pairs with their blue duck and star masters, ready for paraffin.

A salmon 3D-printed two-part candle mold open behind its printed sugar-skull master, with the finished white wax skull candle standing beside it.

A black 3D-printed two-part mold beside a white marigold-dome master, the pale wax shell it cast, and the finished orange marigold candle.

A pink 3D-printed two-part mold and its pan de muerto master, next to the white cast shell and the finished candle.

A black 3D-printed two-part mold standing open with its master, the white cast beside it, and the finished orange wax candle.

A black 3D-printed two-part pumpkin mold with its printed master, the pale wax shell it casts, and the finished orange pumpkin candle.

A copper 3D-printed two-part ghost mold open beside its master, with the white cast and the finished wax ghost candle.

A blue silicone negative mold next to the white plaster gourd it cast, both freshly demolded.

A white 3D-printed faceted plant pot master on its round base plate, held in one hand at a window, ready for the mold walls to seat around it.

A white 3D-printed faceted plant pot master tipped forward in one hand, showing the hollow round cavity inside and the two locating tabs on its base plate.

A white 3D-printed faceted plant pot master standing on a windowsill, the seating groove that the mold wall drops into running right around its round base plate.

A white 3D-printed sitting bear figure master on its rounded-square base plate, held up in front of the 3D printer that produced it.

A cream wax figure candle standing in the sun on a windowsill next to a purple candle jar, cast in a 3D-printed two-part mold.

Both halves of a blue 3D-printed two-part rubber-duck mold lying open on a windowsill, each showing its carved cavity and the notch the wax pours through.

A wax figure candle fresh out of its 3D-printed two-part mold, the cone-shaped pour funnel still attached at the top and not yet trimmed off.

One half of a blue 3D-printed two-part rubber-duck mold held up to the light, showing the duck cavity, the alignment keys along the rim and the pour funnel notch.

The back of a wax figure candle held in one hand, the printed mold's fine layer lines picked up as contour rings across the wax.

Make your own

One half of a large gold 3D-printed silicone formwork, the MESHCAST logo embossed across its outer wall, held up in front of the printer that made it.

A 3D-printed pink-to-yellow crystal tower standing on its base plate between the two open halves of the gold formwork that gets filled with silicone around it.

A cat-face wax candle still sitting in the red 3D-printed two-part mold it was cast in. Made by @candlelight.birmingham.

A 3D-printed two-part candle mold, fresh off the printer bed.

A pair of 3D-printed two-part candle molds, ready to pour wax into.

A blue pillar candle beside the 3D-printed two-part mold it was cast in.

A cast wax candle next to the 3D-printed two-part mold it came from.

3D-printed two-part candle molds, clamped and ready to pour wax.

A freshly cast wax candle beside its 3D-printed two-part mold.

A poured wax candle beside the 3D-printed two-part mold it came from.

A personalized 3D-printed dart stand, made with the Dart holder generator.

A custom 3D-printed dart holder, straight off the printer.

A custom 3D-printed name sign in two colors, made with the Name sign tool.

A custom script name sign 3D-printed in color, made with the Name sign tool.

A 3D-printed candle mold opened to show the freshly cast wax candle inside.

A custom script name sign, 3D-printed with the Name sign tool.

A 3D-printed figure next to the candle cast from its two-part mold.

Easter Island head candle beside the printed two-part mold it came from.

A Moai head candle in its printed mold, straight off the printer bed.

A rubber-duck candle in front of the two-part mold it was cast from.

Layered 'Emma' name sign: black script over a gold initial, from the Name sign tool.

3D-printed two-part mold for a rubber-duck candle. Made by @meshcast.app.

The finished rubber-duck candle, lit, cast from a 3D-printed two-part mold. Made by @meshcast.app.

A rubber-duck candle fresh out of its 3D-printed two-part mold. Made by @meshcast.app.

A frosted-wax rubber-duck candle cast from a 3D-printed mold. Made by @meshcast.app.

Duck candle next to its two-part printed mold. Made by @meshcast.app.

Rubber duck ice cube mold, cast in food-safe silicone. Made by @crossprint3d.

Textured plaster sphere, cast from a Meshcast mold and shown on a pedestal stand. Made by @voxelweave.

What people make with Meshcast

Everything above started as a 3D model in one of the free Meshcast generators and ended up as a printed part or a finished cast. Most of the molds you can see are two-part candle molds: the generator splits a shape along a parting plane, adds alignment keys and a pour funnel, and hands back an STL you print and clamp shut before pouring wax, soap or resin into it.

The rest are direct prints, planters, name signs, dart stands and display pieces, made with the lighter tools. All of them run entirely in the browser, with no CAD and no card.

Candle mold generator The two-part wax molds above
STL to mold generator For any shape you already have
Silicone mold generator For flexible casts
Name sign generator The layered script signs
Dart holder generator The personalised dart stands

Posted a Meshcast mold on MakerWorld or Printables?

Posted a mold you made with Meshcast on MakerWorld or Printables? Paste this into the description and send us the listing: you get Pro free for 1 month, once per maker. It only counts with the text in the description.

Mold made with Meshcast (https://meshcast.app), free 3D mold generators that run in your browser.