◆ Clay
A screen of round bamboo canes side by side, with nodes at staggered heights and fine fibres. Pottery, planters and Asian-style terrain.
Want your own version? Make it free in our texture roller tool. A free account gives you free downloads every week.
Round bamboo canes of slightly different widths standing side by side across the strip, each with a node, a raised ring over a narrow groove, at its own height, and fine fibres running along the cane, like a bamboo fence or a rolled screen. Roll it into stoneware or air-dry clay for planters, cups and vases with a bamboo look, into polymer clay for jewellery and ornaments, or into foam and clay for fences, huts and Asian-style buildings on wargaming tables.
Made with our free texture roller tool, not modelled by hand: we drew the pattern in code as a seamless picture, uploaded it, and set a roller 30 mm across and 80 mm long with an 8 mm bore, the pattern raised 1.5 mm and repeated twice round and twice along. The zip holds the roller and the tool's own fork handle with its two retaining pins, as two STL files, plus the pattern picture, so you can remake the roller at another size or depth.
Every roller in this set is the same size and fits the same 131 mm handle, so you print the handle once and after that only rollers: pull the two pins, swap the roller, push the pins back in.
Shown as a 3D render of the printed roller in its handle on the clay it has pressed, not a photo.
Print the roller standing on its end and the handle and pins lying flat, all as exported, no supports.
Set the roller between the arms of the fork and push one pin through each arm into its bore, hex head outwards; the roller turns on the pins.
Roll the clay to an even thickness first: 4 to 6 mm for terrain and slabs, 2 to 3 mm for jewellery and ornaments.
Roll across once, in one direction, with steady, even pressure, and lift off at the end. Going back and forth doubles the pattern.
Pull the pins to swap to another roller from the set, and wash the roller in warm soapy water after use.
Print details
| Works with | Clay |
|---|---|
| Printed parts | 4 |
| Size (W x D x H) | 32 x 32 x 80 mm |
| Print bed needed | 151 x 131 mm, 81 mm tall |
| Filament | ~68 g |
| Layer height | 0.2 mm |
| Infill | 20% |
| Supports | Not needed |
| Download | ZIP: roller + fork handle and 2 pins (2 STL) + pattern picture (PNG) + print sheet + README |
| Added | 2026-10-01 |
Made with the free Texture roller generator. Upload your own shape and get the same kind of tool built from it, in your browser.
Free download. Opens the Thingiverse listing in a new tab.
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
New to this? Read the texture roller guide.
Roll a slab of stoneware or air-dry clay about 6 mm thick with the canes running from top to bottom, and wrap it round a form lined with newspaper. Join the seam in the groove between two canes, add a base, and glaze it green or brown: a runny glaze pools nicely at the nodes.
Yes. Texture a 4 mm slab of air-dry clay or foam, cut strips as tall as the fence, and add two horizontal rails across them from thin rolls of clay. Paint it a straw yellow, drybrush a pale cream on the canes and pick out the nodes a little darker.
Yes. Every roller in this set is 80 mm long and 30 mm across at the base, with an 8 mm bore, and every zip carries the same fork handle and pins, so you print the handle once and swap rollers by pulling the two pins.
About 2 h 40 min for everything on a current printer at 0.2 mm layers: about 1 h 15 min for the roller and 1 h 30 min for the handle and pins. Once you have the handle, each new roller is only the first part. The times are estimated from the parts' volume, not sliced.
Clay
The Japanese blue sea wave, seigaiha, for pottery and clay crafts. Rows of overlapping fans of concentric arcs.
Clay
Drifting peacock eye feathers for polymer clay and pottery. An eye of rings at each tip and fine barbs along the shaft.
Clay
A field of little daisies for polymer clay, pottery and fondant. Long petals around a domed centre, in three sizes.
Clay
Big split monstera leaves for planters, mugs and boho clay. Slots cut in from the edge and holes along the midrib.
Clay
Six-armed snowflakes of three sizes for Christmas ornaments and winter pottery. Branched arms and a flurry of small flakes.
Clay
Sprigs of spiky holly with clusters of berries for Christmas clay and pottery. Pairs of leaves, three berries each.
Clay
Flying bats with scalloped wings and crescent moons for Halloween clay and pottery. A spooky flock, every bat at its own tilt.
Clay
Trails of dog paw prints for pet lovers. A pad and four toe beans per print, walking across the clay.