◆ Clay

Cracked temple floor textured rolling pin

An ancient floor of octagonal flagstones and square inlays, cracked and broken, for temples and tombs. Carved borders, worn edges.

Make your own texture roller
3D render of the printed cracked temple floor textured rolling pin, its patterned sleeve between two dark handles, resting on a slab of clay it has pressed with a cracked temple floor
Clay ~128 g Pro early access

An ancient floor of octagonal flagstones about 14 by 12.5 mm with square inlays about 5 mm set on the diagonal between them, a carved border line round every octagon, worn edges, long cracks running across it all and a few corners broken away. Roll it into air-dry clay or heat-softened EVA foam for temple floors, tomb chambers, ruined palaces and dungeon rooms next to 28 and 32 mm miniatures, or into stoneware for trivets and tiles.

Read more

Made with our free texture roller tool in its Rolling pin style, not modelled by hand: we drew the pattern in code as a seamless picture, uploaded it, and set a sleeve 40 mm across and 100 mm long, the pattern raised 1.5 mm and repeated three times round and twice along. The zip holds the texture sleeve and the tool's own two rolling-pin handles, as two STL files, plus the pattern picture, so you can remake the sleeve at another diameter or depth.

Every sleeve in this set slides onto the same two handles: the core, 202 mm long overall, a handle with a 30 mm tube, and a cap that locks on with a quarter turn. Print the handles once, and after that only sleeves.

Shown as a 3D render of the printed rolling pin on the clay it has pressed, not a photo.

Cracked temple floor textured rolling pin at a glance: every printed part with its size, print time, filament, print settings and the three steps to use it

What you need

4
  • About 128 g of PLA or PETG for the sleeve and both handles (about 33 g for a sleeve alone)
  • Something to texture: air-dry or polymer clay, EVA foam warmed with a heat gun, or pottery clay
  • A printer that can print 207 mm tall: the core handle stands 202 mm on the bed
  • A little cornstarch, or a water spray for pottery clay, if it starts to stick

How to use it

5

  1. Print the sleeve and both handles standing on their ends, as exported, no supports. A 5 mm brim keeps the tall core steady.

  2. Slide the sleeve over the core's tube, push the cap on with its slots over the two lugs and turn it a quarter turn to lock.

  3. Roll the clay or foam to an even thickness first: 3 to 5 mm for walls, floors and terrain tiles, 1.5 to 2 mm for miniature bases.

  4. Roll across once, in one direction, with steady, even pressure, and lift off at the end. Going back and forth doubles the pattern.

  5. Turn the cap back to swap to another sleeve from the set, and wash the sleeve in warm soapy water after use.

Print details

5 h 10 minPrint time
~128 gFilament
3Printed parts
43 × 42 × 100 mmSize (W x D x H)
All print details
Print details
Works withClay
Printed parts3
Size (W x D x H)43 x 42 x 100 mm
Print bed needed88 x 43 mm, 203 mm tall
Filament~128 g
Layer height0.2 mm
Infill20%
SupportsNot needed
DownloadZIP: texture sleeve + 2 rolling-pin handles (2 STL) + pattern picture (PNG) + print sheet + README
Added2026-09-28

Pro early access until October 28, 2026, then free with any account.

Like it or post your print on Thingiverse

Make your own texture roller →

Made with the free Texture roller generator. Upload your own shape and get the same kind of tool built from it, in your browser.

Free for personal use. Selling the pieces you cast needs a commercial licence (Pro or Founder); passing on the file itself is not permitted on any plan. Full terms.

New to casting? Read the texture roller guide.

textured rolling pintemple floor texturedungeon tilesterrain texture rollerdnd terrain

Questions about this design

How do I paint the cracked temple floor textured rolling pin tiles?

Paint the octagons a sandstone or pale marble colour and the square inlays a darker stone, a dark green or a deep red, then wash the grout and cracks brown and drybrush a light cream over the edges. Gold on the carved borders suits a richer temple.

Does the cracked temple floor textured rolling pin fit a 1 inch grid?

Not exactly: the octagons are about 14 by 12.5 mm, so two of them cover roughly one inch. It is made as a floor texture rather than a grid; to play on a grid, draw the lines on after painting, or cut the tiles to 25 mm squares.

Does the cracked temple floor textured rolling pin fit the same handles as the other sleeves?

Yes. Every sleeve in this set is 100 mm long with a 30.6 mm bore, and every zip carries the same core and cap, so you print the handles once and swap sleeves with a quarter turn of the cap. They also fit handles printed from the texture roller tool itself.

How long does the cracked temple floor textured rolling pin take to print?

About 5 h 10 min for everything on a current printer at 0.2 mm layers: about 1 h 20 min for the sleeve and 3 h 50 min for both handles. Once you have the handles, each new sleeve is only the first part. The times are estimated from the parts' volume, not sliced.

More designs

See all clay tools →