◆ Print only
Reindeer name ornament
A flat reindeer head ornament with antlers and a name, in brown and white.
Want your own version? Make it free in our christmas ornament tool. A free account gives you free downloads every week.
◆ Print only
A flat reindeer head ornament with antlers and a name, in brown and white.
Want your own version? Make it free in our christmas ornament tool. A free account gives you free downloads every week.
A reindeer head with big antlers and a round white nose, in brown with a raised white trim round the edge and "Rudolph" in white script across it, and a loop at the top for a ribbon. Give a child their own reindeer with their name on it: open it in the free tool and type the name instead of Rudolph.
Made with our free Christmas ornament generator, not modelled by hand: we picked the reindeer shape, the name "Rudolph" in the Retro Script font, the gingerbread and icing colour set. Everything else is the tool's default. The zip holds exactly what the tool exports: a 3MF with every part in its own colour, and the same print as one STL. Like every free download from the tool, it carries a small MESHCAST mark where it does not show.
Print it flat, face up, with no supports, thread a ribbon through the loop and it is on the tree the same evening. Print one for everyone at the table, or open the tool and change the words first.
Shown as a 3D render of the printed ornament, lying flat as it comes off the bed, not a photo.
Print it flat, face up, as exported. No supports.
For two colours on one nozzle, change filament at the height in the README: the letters and the trim start there.
Pull off any stringing round the letters with tweezers.
Thread a ribbon, twine or an ornament hook through the loop at the top.
Print details
| Type | Print only |
|---|---|
| Printed parts | 1 |
| Size (W x D x H) | 70 x 80 x 3.4 mm |
| Print bed needed | 80 x 71 mm, 4 mm tall |
| Filament | ~9 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: 3MF in colour + STL + README |
| Added | 2026-11-03 |
Made with the free Christmas ornament generator. Upload your own drawing and get the same kind of part built from it, in your browser.
ZIP: 3MF in colour + STL + README
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
New to this? Read the christmas ornament guide.
No. The tool keeps every part of the outline at least a few millimetres wide, and the whole ornament is one solid piece 2.4 mm thick plus the raised trim, so the antlers survive the tree and the box. PLA or PETG both work.
About 25 min and 9 g of PLA at 0.2 mm layers, estimated from the files rather than sliced, so a current printer is often faster. It prints flat in one piece with no supports, so it suits a first print on any printer.
It is 70 by 80 mm and 3.4 mm thick. To change that, open the free Christmas ornament generator from this page and move the size slider; the rest of the design follows, and you download the new file in a minute.
A mesh bauble whose net is a field of little stars, in two halves that click together, with a hole in the cap for the string.
A mesh bauble whose net is a field of little hearts, in two halves that click together, with a hole in the cap for the string.
A mesh bauble with an organic voronoi net, like a cell structure, in two halves that click together, with a hole in the cap for the string.
A mesh bauble with a net of diamonds like a harlequin glass ball, in two halves that click together, with a hole in the cap for the string.
A honeycomb mesh bauble shaped like a drop, in two halves that click together, with a hanging hole at its tip.
A fish scale mesh bauble in two halves that click together, with a hole in the cap for the string.
A gyroid mesh bauble with the wavy pattern of 3D print infill, in two halves that click together, with a hanging hole.
A spiral mesh bauble whose net winds out from the middle, in two halves that click together, with a hanging hole.