◆ Clay
Slotted deck plates and mesh grilles in raised frames, for sci-fi and industrial terrain. Bolt heads at every corner.
Want your own version? Make it free in our texture roller tool. A free account gives you free downloads every week.
Deck plates about 14 by 12.5 mm in raised frames, each filled with deep slots about 1.8 mm wide between 1.6 mm bars, turned a quarter from one plate to the next, or with a square-mesh grille, and a round bolt head where four frames meet. Roll it into air-dry clay or heat-softened EVA foam for starship corridors, catwalks, hive city floors and industrial bases for 28 and 32 mm miniatures, or into polymer clay for sci-fi props and cosplay details.
Made with our free texture roller tool in its Rolling pin style, not modelled by hand: we drew the pattern in code as a seamless picture, uploaded it, and set a sleeve 40 mm across and 100 mm long, the pattern raised 1.5 mm and repeated three times round and twice along. The sleeve file is then 1 mm shorter, 99 mm, so a printed sleeve turns freely between the handles. The zip holds the texture sleeve and the tool's own two rolling-pin handles, as two STL files, plus the pattern picture, so you can remake the sleeve at another diameter or depth.
Every sleeve in this set slides onto the same two handles: the core, 202 mm long overall, a handle with a 30 mm tube, and a cap that locks on with a quarter turn. Print the handles once, and after that only sleeves.
The first picture is a 3D render of this sleeve on the clay it has pressed. The two photos are our own test print of the rolling-pin system from the texture roller tool, with a hearts sleeve: put together, and as its three parts.
Print the sleeve and both handles standing on their ends, as exported, no supports. A 5 mm brim keeps the tall core steady.
Slide the sleeve over the core's tube, push the cap on with its slots over the two lugs and turn it a quarter turn to lock.
Roll the clay or foam to an even thickness first: 3 to 5 mm for walls, floors and terrain tiles, 1.5 to 2 mm for miniature bases.
Roll across once, in one direction, with steady, even pressure, and lift off at the end. Going back and forth doubles the pattern.
Turn the cap back to swap to another sleeve from the set, and wash the sleeve in warm soapy water after use.
Print details
| Works with | Clay |
|---|---|
| Printed parts | 3 |
| Size (W x D x H) | 43 x 43 x 99 mm |
| Print bed needed | 88 x 43 mm, 203 mm tall |
| Filament | ~129 g |
| Layer height | 0.2 mm |
| Infill | 20% |
| Supports | Not needed |
| Download | ZIP: texture sleeve + 2 rolling-pin handles (2 STL) + pattern picture (PNG) + print sheet + README |
| Added | 2026-09-28 |
Made with the free Texture roller generator. Upload your own shape and get the same kind of tool built from it, in your browser.
Free download. Opens the Thingiverse listing in a new tab.
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
New to this? Read the texture roller guide.
Prime it black so the slots stay dark, then drybrush a gunmetal over the bars and frames and pick out the bolt heads in brass. Hazard stripes on a few frames and a little rust pigment in the corners make it look like a working deck.
No, they are pressed in, about 1 mm deep, not cut through. Painted black they read as open grating from above. For real see-through grating, roll thin clay, let it dry and cut the slots out with a hobby knife along the pressed lines.
Yes. Every sleeve in this set is 99 mm long with a 30.6 mm bore, and every zip carries the same core and cap, so you print the handles once and swap sleeves with a quarter turn of the cap. The texture roller tool's own handles have been a smaller size since 28 September 2026, so use the handles from this zip.
About 5 h 10 min for everything on a current printer at 0.2 mm layers: about 1 h 20 min for the sleeve and 3 h 50 min for both handles. Once you have the handles, each new sleeve is only the first part. The times are estimated from the parts' volume, not sliced.
Clay
The Japanese blue sea wave, seigaiha, for pottery and clay crafts. Rows of overlapping fans of concentric arcs.
Clay
Drifting peacock eye feathers for polymer clay and pottery. An eye of rings at each tip and fine barbs along the shaft.
Clay
A field of little daisies for polymer clay, pottery and fondant. Long petals around a domed centre, in three sizes.
Clay
Big split monstera leaves for planters, mugs and boho clay. Slots cut in from the edge and holes along the midrib.
Clay
Six-armed snowflakes of three sizes for Christmas ornaments and winter pottery. Branched arms and a flurry of small flakes.
Clay
Sprigs of spiky holly with clusters of berries for Christmas clay and pottery. Pairs of leaves, three berries each.
Clay
Flying bats with scalloped wings and crescent moons for Halloween clay and pottery. A spooky flock, every bat at its own tilt.
Clay
Trails of dog paw prints for pet lovers. A pad and four toe beans per print, walking across the clay.