◆ Print only
A flat snowman fridge magnet that says Let it snow, in white, red and navy, with a pocket for a magnet.
Want your own version? Make it free in our christmas ornament tool. A free account gives you free downloads every week.
A snowman for the fridge door: three white snowballs with a navy top hat, scarf, eyes, carrot nose and buttons raised on him, a navy trim round his edge, and "Let it snow" in bold red letters on two lines across his bottom snowball. He is 50 by 110 mm. There is no loop: a pocket in the back takes a 10 by 2 mm disc magnet, and the plate is a little thicker so the pocket stays hidden.
Made with our free Christmas ornament generator, not modelled by hand: we picked the snowman shape, "Let it" and "snow" on two lines in the Fun & Bold font, the snowman white (#f4f6f8) with red letters (#c8102e) and a navy trim (#1d3557), a height of 110 mm and the Fridge magnet hang option. Everything else is the tool's default. The zip holds exactly what the tool exports: a 3MF with every part in its own colour, and the same print as one STL. Like every free download from the tool, it carries a small MESHCAST mark where it does not show.
Print a few as a stocking filler or a Secret Santa gift, press a magnet into each and they hold the Christmas cards and the school nativity letter on the fridge all December.
Shown as a 3D render of the printed ornament, lying flat as it comes off the bed, not a photo.
Print it flat, face up, as exported. No supports.
For two colours on one nozzle, change filament at the height in the README: the letters and the snowman's details start there.
Put a drop of superglue in the pocket on the back and press in a 10 x 2 mm disc magnet.
Print details
| Type | Print only |
|---|---|
| Printed parts | 1 |
| Size (W x D x H) | 50 x 110 x 4.4 mm |
| Print bed needed | 110 x 50 mm, 5 mm tall |
| Filament | ~14 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: 3MF in colour + STL + README |
| Added | 2026-11-03 |
Made with the free Christmas ornament generator. Upload your own drawing and get the same kind of part built from it, in your browser.
ZIP: 3MF in colour + STL + README
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
New to this? Read the christmas ornament guide.
A 10 mm by 2 mm neodymium disc, the common size sold in packs of fifty. The pocket in the back is cut for exactly that, so the magnet sits flush; a drop of superglue keeps it in when the snowman is pulled off the fridge.
About 40 min and 14 g of PLA at 0.2 mm layers, estimated from the files rather than sliced, so a current printer is often faster. It prints flat in one piece with no supports; the magnet pocket is a blind hole in the back, so nothing bridges.
It is 50 by 110 mm and 4.4 mm thick. To change that, open the free Christmas ornament generator from this page and move the size slider; the rest of the design follows, and you download the new file in a minute.
A mesh bauble whose net is a field of little stars, in two halves that click together, with a hole in the cap for the string.
A mesh bauble whose net is a field of little hearts, in two halves that click together, with a hole in the cap for the string.
A mesh bauble with an organic voronoi net, like a cell structure, in two halves that click together, with a hole in the cap for the string.
A mesh bauble with a net of diamonds like a harlequin glass ball, in two halves that click together, with a hole in the cap for the string.
A honeycomb mesh bauble shaped like a drop, in two halves that click together, with a hanging hole at its tip.
A fish scale mesh bauble in two halves that click together, with a hole in the cap for the string.
A gyroid mesh bauble with the wavy pattern of 3D print infill, in two halves that click together, with a hanging hole.
A spiral mesh bauble whose net winds out from the middle, in two halves that click together, with a hanging hole.