◆ Print only
A smooth white bauble with a raised gingerbread man on the front, printed in two halves.
Want your own version? Make it free in our bauble designer tool. A free account gives you free downloads every week.
A bauble for the gingerbread lovers: a smooth white ball with a raised gingerbread man in brown on the front, and a neck on top for a standard metal ornament cap. It looks like a sugar-glazed bauble in silk white PLA, and prints in two flat halves that line up on filament pins, with no supports anywhere. Open it in the free tool to add a child's name under him.
Made with our free bauble designer, not modelled by hand: we picked the ball shape, the Smooth pattern and the gingerbread motif with no name, with the bauble white (#f2efe8) and the motif gingerbread brown (#a0612b). Everything else is the tool's default. The zip holds the 3MF exactly as the tool exports it for a free account, every part in its own colour; every current slicer opens it, and on a one-colour printer it prints in one colour. Like every free download from the tool, it carries a small MESHCAST mark where it does not show.
Print the two halves on their flat faces, push filament pins into one, glue the rims and fit a metal ornament cap in the neck. It hangs like a glass bauble and survives being dropped.
Shown as a 3D render of the printed bauble, its two halves put together, not a photo.
Print both halves on their flat cut faces, dome up, as exported. No supports.
Cut 5.5 mm pieces of 1.75 mm filament and push one into each pin hole of one half.
Put a thin line of superglue gel on the rim and press the halves together on the pins.
Fit a standard metal ornament cap into the neck and hang it.
Print details
| Type | Print only |
|---|---|
| Printed parts | 2 |
| Size (W x D x H) | 80 x 80 x 85 mm |
| Print bed needed | 168 x 86 mm, 42 mm tall |
| Filament | ~90 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: 3MF in colour + README |
| Added | 2026-11-03 |
Made with the free Bauble designer generator. Upload your own drawing and get the same kind of part built from it, in your browser.
ZIP: 3MF in colour + README
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
New to this? Read the bauble designer guide.
Yes. Open the free bauble designer from this page, pick the ball, the Smooth pattern and the gingerbread motif, and type the name. The tool shrinks the gingerbread man and the letters together so both fit the panel on the front.
About 4 h 10 min and 90 g of PLA at 0.2 mm layers, estimated from the files rather than sliced, so a current printer is often faster. The two halves print side by side on their flat faces with no supports.
It is 80 by 80 mm and 85 mm tall. To change that, open the free bauble designer from this page and move the size slider; the rest of the design follows, and you download the new file in a minute.
A mesh bauble whose net is a field of little stars, in two halves that click together, with a hole in the cap for the string.
A mesh bauble whose net is a field of little hearts, in two halves that click together, with a hole in the cap for the string.
A mesh bauble with an organic voronoi net, like a cell structure, in two halves that click together, with a hole in the cap for the string.
A mesh bauble with a net of diamonds like a harlequin glass ball, in two halves that click together, with a hole in the cap for the string.
A honeycomb mesh bauble shaped like a drop, in two halves that click together, with a hanging hole at its tip.
A fish scale mesh bauble in two halves that click together, with a hole in the cap for the string.
A gyroid mesh bauble with the wavy pattern of 3D print infill, in two halves that click together, with a hanging hole.
A spiral mesh bauble whose net winds out from the middle, in two halves that click together, with a hanging hole.