◆ Print only
A tall cream townhouse with heart windows and Home in red, glowing over an LED tealight.
Want your own version? Make it free in our christmas house tool. A free account gives you free downloads every week.
A tall, narrow Christmas house that says it on the front: a cream townhouse with heart shaped windows, a red roof under white snow, a chimney, and "Home" raised in red above the door. Stand it over an LED tealight and the hearts glow. It prints in one piece, standing up, with no supports.
Made with our free Christmas house generator, not modelled by hand: we picked the Tealight house, the Tall shape, heart windows, snow on the roof and "Home" raised in its own colour, with the walls in a warm cream (#e9dcc0). Everything else is the tool's default. The zip holds exactly what the tool exports: a 3MF with every part in its own colour, and the same print as one STL. Like every free download from the tool, it carries a small MESHCAST mark where it does not show.
A housewarming present for December: open it in the tool, type the family name instead of Home, and it is on their windowsill the same evening.
Shown as a 3D render of the printed house, as it comes off the bed, not a photo.

Print it standing on its open floor, as exported. No supports.
Clean any stringing out of the heart windows and the door.
Set it over a battery LED tealight, never a real candle.
Print details
| Type | Print only |
|---|---|
| Printed parts | 1 |
| Size (W x D x H) | 64 x 58 x 144 mm |
| Print bed needed | 64 x 58 mm, 144 mm tall |
| Filament | ~60 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: 3MF in colour + STL + README |
| Added | 2026-11-03 |
Made with the free Christmas house generator. Upload your own drawing and get the same kind of part built from it, in your browser.
ZIP: 3MF in colour + STL + README
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
New to this? Read the tealight house guide.
Yes, that is what it is for. Open the free Christmas house generator from this page, pick the tall tealight house, and type a family name on one or two lines; choose Raised for letters in their own colour, or Engraved for letters that glow when the light is on.
About 2 h 50 min and 60 g of PLA at 0.2 mm layers, estimated from the files rather than sliced, so a current printer is often faster. It prints in one piece standing on its open floor, with no supports.
It is 64 by 58 mm and 144 mm tall. To change that, open the free Christmas house generator from this page and move the size sliders; the rest of the design follows, and you download the new file in a minute.
A mesh bauble whose net is a field of little stars, in two halves that click together, with a hole in the cap for the string.
A mesh bauble whose net is a field of little hearts, in two halves that click together, with a hole in the cap for the string.
A mesh bauble with an organic voronoi net, like a cell structure, in two halves that click together, with a hole in the cap for the string.
A mesh bauble with a net of diamonds like a harlequin glass ball, in two halves that click together, with a hole in the cap for the string.
A honeycomb mesh bauble shaped like a drop, in two halves that click together, with a hanging hole at its tip.
A fish scale mesh bauble in two halves that click together, with a hole in the cap for the string.
A gyroid mesh bauble with the wavy pattern of 3D print infill, in two halves that click together, with a hanging hole.
A spiral mesh bauble whose net winds out from the middle, in two halves that click together, with a hanging hole.