◆ Print only

Love you more keychain

"Love you more" in two lines of retro script, cut out in red with white letters.

Make your own keychain
3D render of a red and white 3D-printed Love you more keychain with a steel split ring through its hole
Print only ~3 g Pro early access

"Love you / more" in two lines of a bold retro script, cut out around the words so the shape of the keychain is the phrase itself. White letters raised on a red outline, which reads from a distance and still looks good up close. Good for Valentine's Day, anniversaries, a partner far away or the last word in a long-running argument about who loves whom more.

Read more

Made with our free keychain generator, not modelled by hand: we typed "Love you" and "more" on two lines, chose the Letter outline shape and the Retro Script font, set the text size to 11 mm and the border to 3.5 mm, and picked the two colours. The zip holds exactly what the tool downloads: a 3MF with the tag and the raised letters as two coloured parts, and a one-piece STL. It comes out 49 by 31 mm and 4 mm thick, and prints flat with no supports.

Make two and keep one: the pair is a running joke on two keyrings. Printed in one colour it still reads, because the letters stand proud of the tag; for red and white, a single-nozzle printer needs one filament change, and the print sheet in the zip says where.

Shown as a 3D render of the printed keychain with a steel split ring, not a photo.

What you need

2
  • About 3 g of PLA or PETG, in red and white
  • A split ring or keyring, about 25 mm across

How to make it

4

  1. Print it flat as exported: no supports, 0.4 mm nozzle, 0.2 mm layers.

  2. Multi-colour printer: open the 3MF, each part already carries its colour. Single nozzle: add a filament change in the slicer's layer preview for white at 3.3 mm above the bed.

  3. Let the bed cool before you lift the tag off, so the thin edges stay flat.

  4. Open the split ring with a thumbnail or a small screwdriver and wind it through the hole.

Print details

21 minPrint time
~3 gFilament
1Printed parts
49 × 31 × 4 mmSize (W x D x H)
All print details
Print details
TypePrint only
Printed parts1
Size (W x D x H)49 x 31 x 4 mm
Print bed needed50 x 31 mm, 5 mm tall
Filament~3 g
Layer height0.2 mm
Infill15%
SupportsNot needed
DownloadZIP: keychain in 2 colours (3MF) + one-piece STL + print sheet + README
Added2026-09-25

Pro early access until October 25, 2026, then free with any account.

Make your own keychain →

Made with the free Keychain & tags generator. Upload your own drawing and get the same kind of part built from it, in your browser.

Free for personal use. Selling the pieces you cast needs a commercial licence (Pro or Founder); passing on the file itself is not permitted on any plan. Full terms.

New to casting? Read the keychain guide.

love you more keychaincouples keychainvalentines giftanniversary gift

Questions about this design

Can I make a matching pair of Love you more keychains?

Yes, and it is the nicest way to give it: print two, in the same colours or swapped (red letters on white, white on red). Or open the keychain tool and type "Love you most" for the second one, so the pair answers each other.

Is the script on the Love you more keychain too thin to print?

No. The font is one of the keychain tool's bold scripts, chosen because its strokes stay thick enough for a 0.4 mm nozzle, and the letters sit on a solid outline rather than floating, so every swash is held from below.

Where do I change filament to print the Love you more keychain in 2 colours?

Start in red, then change to white at 3.3 mm above the bed. Those heights are measured in the file, from its lowest point, which is where your slicer puts the bed; add each change in the layer preview where the new colour first shows. With a multi-colour printer, skip all that and open the 3MF.

More designs