◆ Print only

Bride keychain

A cut-out "Bride" script keychain in white and gold, for the engagement, the hen party or the big day.

Make your own keychain
3D render of a white and gold 3D-printed Bride keychain with a steel split ring through its hole
Print only ~2 g Pro early access

"Bride" in a flowing retro script, cut out around the word, gold letters raised on a white outline. A popular little gift for a newly engaged friend and a favourite for hen and bachelorette parties, where one Bride tag sits among a set for the whole group. Good for engagements, hen and bachelorette parties, bridal showers and the wedding morning.

Read more

Made with our free keychain generator, not modelled by hand: we typed "Bride", chose the Letter outline shape and the Retro Script font, set the text size to 16 mm and the border to 3.5 mm, and picked the two colours. The zip holds exactly what the tool downloads: a 3MF with the tag and the raised letters as two coloured parts, and a one-piece STL. It comes out 50 by 20 mm and 4 mm thick, and prints flat with no supports.

Print one Bride and a matching set for the bridesmaids in the free keychain tool, same font and colours, for a party favour everyone keeps. Printed in one colour it still reads, because the letters stand proud of the tag; for white and gold, a single-nozzle printer needs one filament change, and the print sheet in the zip says where.

Shown as a 3D render of the printed keychain with a steel split ring, not a photo.

What you need

2
  • About 2 g of PLA or PETG, in white and gold
  • A split ring or keyring, about 25 mm across

How to make it

4

  1. Print it flat as exported: no supports, 0.4 mm nozzle, 0.2 mm layers.

  2. Multi-colour printer: open the 3MF, each part already carries its colour. Single nozzle: add a filament change in the slicer's layer preview for gold at 3.3 mm above the bed.

  3. Let the bed cool before you lift the tag off, so the thin edges stay flat.

  4. Open the split ring with a thumbnail or a small screwdriver and wind it through the hole.

Print details

16 minPrint time
~2 gFilament
1Printed parts
50 × 20 × 4 mmSize (W x D x H)
All print details
Print details
TypePrint only
Printed parts1
Size (W x D x H)50 x 20 x 4 mm
Print bed needed51 x 20 mm, 5 mm tall
Filament~2 g
Layer height0.2 mm
Infill15%
SupportsNot needed
DownloadZIP: keychain in 2 colours (3MF) + one-piece STL + print sheet + README
Added2026-09-25

Pro early access until October 25, 2026, then free with any account.

Make your own keychain →

Made with the free Keychain & tags generator. Upload your own drawing and get the same kind of part built from it, in your browser.

Free for personal use. Selling the pieces you cast needs a commercial licence (Pro or Founder); passing on the file itself is not permitted on any plan. Full terms.

New to casting? Read the keychain guide.

bride keychainbachelorette favorbridal shower giftengagement giftwedding keychain

Questions about this design

Can I make bridesmaid keychains to match the Bride keychain?

Yes. Open the free keychain tool with the same settings (Letter outline, Retro Script) and type Bridesmaid, Maid of Honor or Bride Squad. Keep the same two colours and every tag in the set matches the Bride one.

What filament gives the Bride keychain its gold look?

A silk gold PLA for the letters and a plain white for the outline, as in the file. Silk filaments are shiny and catch the light like foil lettering, which is the look people expect from a wedding keychain.

Where do I change filament to print the Bride keychain in 2 colours?

Start in white, then change to gold at 3.3 mm above the bed. Those heights are measured in the file, from its lowest point, which is where your slicer puts the bed; add each change in the layer preview where the new colour first shows. With a multi-colour printer, skip all that and open the 3MF.

More designs