◆ Print only
A round 80 mm bauble cut into crisp facets like ice, with a raised silver snowflake, printed in two halves.
Want your own version? Make it free in our bauble designer tool. A free account gives you free downloads every week.
A real round bauble you print yourself: an 80 mm navy ball cut into crisp facets like a piece of ice, with a smooth panel on the front and a raised silver snowflake on it, and a neck on top for a standard metal ornament cap. It prints in two flat halves that line up on filament pins, so there is no support anywhere and the seam runs round the side where the tree hides it.
Made with our free bauble designer, not modelled by hand: we picked the ball shape, the Hex pattern, the snowflake motif with no name, and the navy and silver colour set. Everything else is the tool's default. The zip holds exactly what the tool exports: a 3MF with every part in its own colour, and the same print as one STL. Like every free download from the tool, it carries a small MESHCAST mark where it does not show.
Print the two halves on their flat faces, push filament pins into one, glue the rims and fit a metal ornament cap in the neck. It hangs like a glass bauble and survives being dropped.
Shown as a 3D render of the printed bauble, its two halves put together, not a photo.
Print both halves on their flat cut faces, dome up, as exported. No supports.
Cut 5.5 mm pieces of 1.75 mm filament and push one into each pin hole of one half.
Put a thin line of superglue gel on the rim and press the halves together on the pins.
Fit a standard metal ornament cap into the neck and hang it.
Print details
| Type | Print only |
|---|---|
| Printed parts | 2 |
| Size (W x D x H) | 80 x 80 x 85 mm |
| Print bed needed | 168 x 86 mm, 42 mm tall |
| Filament | ~85 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: 3MF in colour + STL + README |
| Added | 2026-11-03 |
Made with the free Bauble designer generator. Upload your own drawing and get the same kind of part built from it, in your browser.
ZIP: 3MF in colour + STL + README
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
New to this? Read the bauble designer guide.
Each half has three holes in its flat face for pins made of 1.75 mm filament. Cut three 5.5 mm pieces, push them into one half, put a thin line of superglue gel on the rim and press the other half on. The pins line the halves up exactly, and the seam ends up round the side of the bauble.
About 4 h and 85 g of PLA at 0.2 mm layers, estimated from the files rather than sliced, so a current printer is often faster. The two halves print side by side on their flat faces with no supports.
It is 80 by 80 mm and 85 mm tall. To change that, open the free bauble designer from this page and move the size slider; the rest of the design follows, and you download the new file in a minute.
A flat five point star that says Merry Christmas, in red, white and gold, with a loop for the ribbon.
A flat ball ornament for a baby's first Christmas, in navy, white and silver, ready for the baby's name.
An onion dome bauble with a twisting spiral and Noel in raised white script, printed in two halves.
A gingerbread house that never goes stale: flat panels with the icing printed on, glued together in an afternoon.
A little cottage with snow on the roof that glows over an LED tealight, printed in one piece.
An "I heart NAPS" keychain in black, white and red, for the person who can sleep anywhere, any time.
An "I heart PIZZA" keychain in black, white and red, for the friend who answers every dinner question the same way.
An "I heart TACOS" keychain in black, white and red. Every day is Taco Tuesday on this keyring.