◆ Print only
A little cottage with snow on the roof that glows over an LED tealight, printed in one piece.
Want your own version? Make it free in our christmas house tool. A free account gives you free downloads every week.
A Christmas village house that lights up: a cream cottage with paned windows, a round window in the gable, an arched door and a chimney, under a red roof with a thick layer of white snow. Stand it over an LED tealight and every window glows. It is 76 by 62 mm and 102 mm tall and prints in one piece, standing up, with no supports.
Made with our free Christmas house generator, not modelled by hand: we picked the Tealight house, the Cottage shape and snow on the roof, with the walls in a warm cream (#e9dcc0). Everything else is the tool's default. The zip holds exactly what the tool exports: a 3MF with every part in its own colour, and the same print as one STL. Like every free download from the tool, it carries a small MESHCAST mark where it does not show.
Set it over an LED tealight on a windowsill or a shelf, or print three in different colours for a little village. The 3MF gives walls, roof and snow their own colours on a multicolour printer.
Shown as a 3D render of the printed house, as it comes off the bed, not a photo.
Print it standing on its open floor, as exported. No supports.
Clean any stringing out of the windows and the door.
Set it over a battery LED tealight, never a real candle.
Print details
| Type | Print only |
|---|---|
| Printed parts | 1 |
| Size (W x D x H) | 76 x 62 x 102 mm |
| Print bed needed | 76 x 62 mm, 102 mm tall |
| Filament | ~67 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: 3MF in colour + STL + README |
| Added | 2026-11-03 |
Made with the free Christmas house generator. Upload your own drawing and get the same kind of part built from it, in your browser.
ZIP: 3MF in colour + STL + README
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
New to this? Read the tealight house guide.
No, only a battery LED tealight. The house is printed plastic and a real flame would soften PLA within minutes. Set the house over an LED tealight instead (the inside is about 66 by 52 mm, so it fits with room to spare) and it lights every window safely all evening.
About 3 h 5 min and 67 g of PLA at 0.2 mm layers, estimated from the files rather than sliced, so a current printer is often faster. It prints in one piece standing on its open floor, with no supports.
It is 76 by 62 mm and 102 mm tall. To change that, open the free Christmas house generator from this page and move the size sliders; the rest of the design follows, and you download the new file in a minute.
A flat five point star that says Merry Christmas, in red, white and gold, with a loop for the ribbon.
A flat ball ornament for a baby's first Christmas, in navy, white and silver, ready for the baby's name.
A round 80 mm bauble cut into crisp facets like ice, with a raised silver snowflake, printed in two halves.
An onion dome bauble with a twisting spiral and Noel in raised white script, printed in two halves.
A gingerbread house that never goes stale: flat panels with the icing printed on, glued together in an afternoon.
An "I heart NAPS" keychain in black, white and red, for the person who can sleep anywhere, any time.
An "I heart PIZZA" keychain in black, white and red, for the friend who answers every dinner question the same way.
An "I heart TACOS" keychain in black, white and red. Every day is Taco Tuesday on this keyring.