◆ Candle wax
Bunny candle mold
A sitting bunny candle, 96 mm tall: a round body, front paws, a sleepy face, two tall ears and a pompom tail. A rigid two-part print.
◆ Candle wax
A sitting bunny candle, 96 mm tall: a round body, front paws, a sleepy face, two tall ears and a pompom tail. A rigid two-part print.
A bunny candle 96 mm tall to the tips of its ears and 51 mm wide: a round sitting body, two front paws, a round head with closed eyes, whisker pads and a little nose, two tall ears with their insides shaped, and a pompom tail behind.
The mold is exactly what our two-part candle mold generator builds for it: two rigid halves with rubber-band grooves, pry pockets and a pour funnel on top. The ears stand in the plane of the seam, so they are part of the outline, and the face and paws are on the front half, so the tool's own seam check finds nothing stuck. No silicone needed.
An Easter and nursery favourite that sells all year as a gift. Pour it in white, blush or pastel yellow. The zip carries both halves, the bunny master as its own STL, the tool's own print-settings sheet and a recipe file for the generator.
Shown as a 3D render of the printed mold halves pulled apart around the candle they cast, not a photo.
Print both halves as exported. Clamp-strength settings: 4 walls, 40% gyroid infill, no supports.
Drop a tabbed wick into one half so the tab sits on the cavity floor, close the halves and band them along the whole seam.
Clip the wick centred across the pour funnel and pour at 65 to 75 C.
Once the first pour is firm but still warm, top up the funnel. Wax shrinks, and the second pour fills the dip.
Cool fully, open the halves at the pry pockets and trim the wick between the ears.
Print details
| Cast material | Candle wax |
|---|---|
| Printed parts | 2 |
| Size (W x D x H) | 67 x 72 x 117 mm |
| Print bed needed | 72 x 35 mm, 117 mm tall |
| Filament | ~310 g |
| Layer height | 0.2 mm |
| Infill | 40% |
| Supports | Not needed |
| Download | ZIP: 2 printed parts (STL) + candle master (STL) + print sheet + recipe |
| Added | 2026-09-25 |
Pro early access until October 25, 2026, then free with any account.
Make your own candle mold →Made with the free Rigid box mold generator. Upload your own model and get the same kind of mold built around it, in your browser.
Free for personal use. Selling the pieces you cast needs a commercial licence (Pro or Founder); passing on the file itself is not permitted on any plan. Full terms.
New to casting? Read the candle mold guide.
Yes, each ear is 11 mm thick and 13 mm wide and joins the head in a wide root. Open the halves slowly and lift the bunny by its body.
Out of the top of the head, between the ears, where the pour funnel sits, down into the body. The ears stay standing for most of the burn.
Pour the bunny white, then dab the nose and the shaped insides of the ears with pink candle paint once it is cool.
Candle waxPro early access
A little sheet ghost with big eyes and an "o" mouth, 86 mm tall. A rigid two-part print for Halloween candles.
Candle waxPro early access
A sitting teddy bear with button eyes, a ribbon bow and its paws on its tummy. A rigid two-part print.
Candle waxPro early access
A traditional straw beehive with coiled bands, an arched entrance and a bee above the door. A rigid two-part print.
Candle waxPro early access
An 82 mm lotus flower candle, four rings of petals round a closed bud, as a silicone mold from a printed shell.
Candle waxPro early access
An 87 mm pine cone candle with 120 overlapping scales, as a silicone mold from a printed shell.
Candle waxPro early access
An 86 mm dragon egg candle covered in rows of overlapping scales, as a silicone mold from a printed shell.
Candle waxPro early access
Six maple leaf wax melts per pour, with the veins pressed in, from a silicone tray you make yourself.
Candle waxPro early access
Six plump pumpkin wax melts per pour, ribbed and with a little stem, from a silicone tray you make yourself.