◆ Soap

Giant chicken nugget soap mold

A giant chicken nugget with a bite taken out, as an 87 mm soap bar from a silicone mold you print.

Make your own silicone mold Download free on Thingiverse
3D render of the chicken nugget soap master fused on its printed charcoal base, between the orange and blue walls, with the charcoal clamps behind
Soap ~145 g

A soap bar 87 x 58 mm and about 24 mm high shaped like one very large chicken nugget: a lumpy outline, a breadcrumb coating all over the top and a bite taken out of one corner.

Read more

Made with the box mode of our silicone mold maker in its contoured shape: print the base with the soap master fused onto it face up, the two walls and the clamps, pour about 376 ml of silicone, and the block you get casts the bar face down, so the breadcrumb top comes out on the show face and the back stays flat.

Food soaps that are not food are some of the best-selling novelty bars, and a nugget is the one people pick up and laugh at. Pour it golden orange; a sweet or smoky scent sells the joke, a clean one keeps it soap. The zip carries every printed part, the soap master as its own STL, the tool's own print-settings sheet and a recipe file for the generator.

Shown as a 3D render of the printed mold parts pulled apart around the master, not a photo.

Giant chicken nugget soap mold at a glance: every printed part with its size, print time, filament, print settings and the three steps to use it

What you need

3
  • About 410 ml of silicone (mix it in one batch)
  • Melt-and-pour soap base, about 57 ml per bar
  • Golden orange soap colour, a fragrance and rubbing alcohol in a spray bottle

How to cast it

6

  1. Print the base with the master fused onto it, the two walls and the two clamps.

  2. Stand the base on the table. Set each wall down a few centimetres out from it and slide it in over the table until the ridge round the base sits in the groove at its foot, then slide the clamps down over the seams. Once they are on, the walls cannot lift, and the ridge seals the bottom.

  3. Mix 410 ml of silicone in one batch and pour it into a corner, letting it rise around the master until it covers the top.

  4. Once it has cured, take the clamps off, slide the walls straight out and pull the silicone block off the master. That block is your mold.

  5. Turn the block over. Spray the cavity with alcohol so the soap runs into the crumb texture, pour melt-and-pour soap at 55 to 60 C, spray again and let it set for a few hours.

  6. Flex the silicone and push the nugget out from the back.

Print details

4 h 20 minPrint time
~145 gFilament
5Printed parts
103 × 74 × 60 mmSize (W x D x H)
All print details
Print details
Cast materialSoap
Printed parts5
Size (W x D x H)103 x 74 x 60 mm
Print bed needed127 x 74 mm, 60 mm tall
Filament~145 g
Layer height0.2 mm
Infill15%
SupportsNot needed
DownloadZIP: 5 printed parts (STL) + soap bar master (STL) + print sheet + recipe
Added2026-09-25
Make your own silicone mold →

Made with the free Silicone mold maker generator. Upload your own model and get the same kind of mold built around it, in your browser.

Download free on Thingiverse

Free download. Opens the Thingiverse listing in a new tab.

Free for personal use. Selling the pieces you cast needs a commercial licence (Pro or Founder); passing on the file itself is not permitted on any plan. Full terms.

New to casting? Read the silicone mold maker guide.

chicken nugget soap moldfood soap moldfunny soap moldgag gift soapsilicone soap mold stl

Questions about this design

How do I make the chicken nugget soap look golden fried?

Use an opaque base, a golden yellow colour and a touch of orange or brown. For a deeper crust, brush a little darker mica into the empty cavity before you pour: it sits on the breadcrumb peaks.

Could someone mistake a chicken nugget soap for food?

It is realistic enough to be the joke, so label and package it clearly as soap, keep it away from small children and do not display it with real food at a market.

Can I make a dipping sauce pot to go with the nugget soap?

Pour a little orange or red soap into any small round silicone cup and set the nugget next to it in the box. It turns one bar into a gift set.

More designs

See all soap molds →