◆ Cookie dough
Christmas bell cookie cutter and stamp
A Christmas bell on its rim with a clapper, and a stamp that presses in two bands and a star.
◆ Cookie dough
A Christmas bell on its rim with a clapper, and a stamp that presses in two bands and a star.
A flared Christmas bell with a round knob on top, a rim along the bottom and the clapper hanging under it. The stamp presses a border line, two bands across the bell, the edge of the rim and a small star into the cut dough, ready for gold, silver or red icing. Good for Christmas cookie trays, New Year's Eve, church bazaars and wedding bell favours. The cookie comes out about 81 by 90 mm.
Made with our free cookie cutter generator, not modelled by hand: we drew the shape with the stamp's lines inside it, uploaded it to the tool, set the cutter size to 90 mm and switched on Generate stamp. The STL in the zip is exactly what the tool gives you: the cutter (a 0.8 mm blade, 14 mm tall, with a 4 mm rim to press on) and, next to it, the stamp that drops inside the cutter and presses the lines into the cut cookie. Both print flat, with no supports. The drawing is in the zip too, as an SVG, so you can make both bigger or smaller.
Once the icing has set, brush the pressed bands with edible gold dust mixed with a drop of lemon extract. It settles in the grooves and the bells shine.
Shown as a 3D render of the printed cutter and stamp and two stamped cookies, not a photo.
Print the file as exported: the cutter rim flat on the bed with the blade pointing up, and the stamp beside it, no supports.
Wash both parts in warm soapy water before the first use.
Roll the chilled dough 5 to 6 mm thick between two sheets of baking paper.
Dip the blade in flour, press straight down with your palm on the rim, and lift.
Dust the stamp, press it pattern side down into each cut cookie about 2 mm deep, and lift it straight up.
Chill the stamped cookies for ten minutes, then bake.
Wash both parts by hand straight after use and let them dry. PLA softens in a dishwasher.
Print details
| Works with | Cookie dough |
|---|---|
| Printed parts | 2 |
| Size (W x D x H) | 194 x 98 x 14 mm |
| Print bed needed | 195 x 98 mm, 14 mm tall |
| Filament | ~20 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: cutter and stamp (STL) + print and food-contact sheet + silhouette (SVG) + README |
| Added | 2026-09-26 |
Made with the free Cookie cutter generator. Upload your own shape and get the same kind of tool built from it, in your browser.
Free download. Opens the Thingiverse listing in a new tab.
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
Food contact: the cutter only touches dough briefly, but layer lines hold residue. Print it in a food-contact filament, wash it by hand in warm water, and keep it away from the dishwasher. Food-safe guide.
New to this? Read the cutter guide.
Yes. Cover the star with icing and flood the bells in white or ivory with the bands picked out in silver or gold. Two bells side by side on a plate read as wedding bells straight away.
Not at this size: the clapper is a round knob well over a centimetre across that grows out of the rim, not a thin stalk. Roll the dough 5 to 6 mm and lift each cookie with a spatula under the whole bell.
Yes. Upload bell.svg from the zip to the free cookie cutter generator, switch on Generate stamp, and move the Cutter size slider (this one is 90 mm). The stamp scales with the cutter, so its lines still fit the cookie.
Six autumn leaf cookie cutters with vein stamps: maple, oak, ginkgo, birch, sweetgum and linden.
Four cutters that build a gingerbread house: two gables, a side wall and a roof panel, with the door and windows cut in the same press.
Six Christmas village cookie cutters with stamps: cottage, church, townhouse, fir tree, street lamp and wreath.
Six Hanukkah cookie cutters with stamps: menorah, dreidel, Star of David, oil jug, sufganiyah and gelt coin.
Six New Year's Eve cookie cutters with stamps: champagne bottle, glass, clock at midnight, firework, top hat and party popper.
Six safari cookie cutters with stamps: elephant, giraffe, lion, hippo, monkey and palm tree.
Six sports ball cookie cutters with stamps: soccer ball, basketball, baseball, American football, tennis ball and volleyball.
Six garden cookie cutters with stamps: sunflower, daisy, tulip, cherry blossom, watering can and bee.