◆ Cookie dough
Five Christmas candy cookie cutters with stamps: a peppermint, a wrapped sweet, a lollipop, a candy cane and a gumdrop.
Want your own version? Make it free in our cookie cutter tool. A free account gives you free downloads every week.
The sweets from the top of a gingerbread house, as cookies: a round peppermint with its swirl, a wrapped sweet with twisted ends, a swirl lollipop on its stick, a striped candy cane and a sugared gumdrop. Every cutter has a stamp that presses the swirls, stripes and sugar dots into the cut cookie, so red and white icing in the grooves turns them into candy. Good for Christmas cookie boxes, gingerbread house parties, kids' decorating afternoons, candy-themed parties and stocking fillers.
All five were made with our free cookie cutter generator, not modelled by hand: we drew each shape with its stamp's lines inside it and uploaded it with Generate stamp switched on. The zip holds exactly what the tool gives you, one STL per shape with the cutter (a 0.8 mm blade, 14 mm tall, with a 4 mm rim to press on) and its stamp side by side, plus each drawing as an SVG. The cookies come out 85 x 85 mm (peppermint), 95 x 50 mm (wrapped sweet), 71 x 95 mm (lollipop), 54 x 95 mm (candy cane) and 85 x 78 mm (gumdrop).
Flood the peppermint, the lollipop and the cane in white, let them crust, then fill every other pressed section in red with a fine tip: the stamp has drawn the swirl and the stripes, so the candy stripes come out even without any piping skill.
The cutters and stamps print flat with no supports, in PLA or PETG. A cutter touches dough for a minute, but a 3D print has fine layer grooves where crumbs can sit: pick a food-contact filament if you can, wash each part by hand in warm soapy water before and after use, never in a dishwasher, and flour the blade and stamp before every press.
Shown as a 3D render of the five printed cutters, their stamps and a stamped cookie from each, not a photo.
Print each file as exported: the cutter rim flat on the bed with the blade pointing up, and its stamp beside it, no supports.
Wash every part in warm soapy water before the first use.
Roll the chilled dough 5 to 6 mm thick between two sheets of baking paper.
Dip a cutter's blade in flour, press straight down with your palm on the rim, and lift.
Dust its stamp, press it into each cookie that cutter cut, about 2 mm deep, and lift it straight up.
Chill the stamped cookies for ten minutes, then bake.
Wash the parts by hand straight after use and let them dry. PLA softens in a dishwasher.
Print details
| Works with | Cookie dough |
|---|---|
| Printed parts | 10 |
| Print bed needed | 214 x 103 mm, 14 mm tall |
| Filament | ~102 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: five cutters with their stamps (5 STL) + print and food-contact sheet + drawings (SVG) + README |
| Added | 2026-11-03 |
Made with the free Cookie cutter generator. Upload your own shape and get the same kind of tool built from it, in your browser.
ZIP: five cutters with their stamps (5 STL) + print and food-contact sheet + drawings (SVG) + README
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
Food contact: the cutter only touches dough briefly, but layer lines hold residue. Print it in a food-contact filament, wash it by hand in warm water, and keep it away from the dishwasher. Food-safe guide.
New to this? Read the cutter guide.
Five, each with a matching stamp: a round peppermint with an eight arm swirl, a wrapped sweet with twisted ends, a lollipop with a swirl on a stick, a candy cane with diagonal stripes and a gumdrop with sugar dots.
Flood the cookie in white and let it crust for an hour, then fill alternate pressed sections in red with a thin icing. The stamp has already drawn the swirl and the stripes, so each colour stays in its own section and the stripes come out even.
Yes. The stick is part of the cookie, but you can also push a real lollipop stick up into the cut dough before baking. Bake flat, let the cookies cool on the tray, and they stand in a jar or a block of foam like real lollipops.
Yes. Every drawing is in the zip as an SVG: upload one to the free cookie cutter generator, switch on Generate stamp and move the Cutter size slider (these are 85 to 95 mm). The stamp scales with its cutter, so its lines still fit the cookie.
Five Christmas ornament cookie cutters with stamps: a round bauble, a drop, an onion dome, an icicle and a heart, each with its cap.
Five Scandinavian Christmas cookie cutters with stamps: an eight point star, a folk heart, a fir tree, a knitted mitten and a rosette.
Six autumn leaf cookie cutters with vein stamps: maple, oak, ginkgo, birch, sweetgum and linden.
Four cutters that build a gingerbread house: two gables, a side wall and a roof panel, with the door and windows cut in the same press.
Six Christmas village cookie cutters with stamps: cottage, church, townhouse, fir tree, street lamp and wreath.
Six Hanukkah cookie cutters with stamps: menorah, dreidel, Star of David, oil jug, sufganiyah and gelt coin.
Six New Year's Eve cookie cutters with stamps: champagne bottle, glass, clock at midnight, firework, top hat and party popper.
Six safari cookie cutters with stamps: elephant, giraffe, lion, hippo, monkey and palm tree.