◆ Cookie dough
New Year's Eve cookie cutter set with stamps
Six New Year's Eve cookie cutters with stamps: champagne bottle, glass, clock at midnight, firework, top hat and party popper.
◆ Cookie dough
Six New Year's Eve cookie cutters with stamps: champagne bottle, glass, clock at midnight, firework, top hat and party popper.
Six shapes for the countdown: a champagne bottle with a starred label, a coupe glass with bubbles, an alarm clock with both hands on twelve, an eight-point firework burst, a top hat with its band and a party popper throwing streamers and a star. Every cutter has a stamp that presses the label, the bubbles, the clock face or the burst lines into the cut cookie. Good for New Year's Eve parties, countdown dessert tables, office parties, Hogmanay and party favour bags.
All six were made with our free cookie cutter generator, not modelled by hand: we drew each shape with its stamp's lines inside it and uploaded it with Generate stamp switched on. The zip holds exactly what the tool gives you, one STL per shape with the cutter (a 0.8 mm blade, 14 mm tall, with a 4 mm rim to press on) and its stamp side by side, plus each drawing as an SVG. The cookies come out 43 x 95 mm (champagne bottle), 90 x 84 mm (champagne glass), 75 x 85 mm (clock at midnight), 90 x 90 mm (firework), 90 x 80 mm (top hat) and 84 x 90 mm (party popper).
Flood the cookies in black, navy or white and let them set, then fill the pressed lines with gold or silver: lustre dust mixed with a few drops of clear alcohol, painted on with a fine brush. The clock, the firework and the bottle label look like foil printing.
The cutters and stamps print flat with no supports, in PLA or PETG. A cutter touches dough for a minute, but a 3D print has fine layer grooves where crumbs can sit: pick a food-contact filament if you can, wash each part by hand in warm soapy water before and after use, never in a dishwasher, and flour the blade and stamp before every press.
Shown as a 3D render of the six printed cutters, their stamps and a stamped cookie from each, not a photo.
Print each file as exported: the cutter rim flat on the bed with the blade pointing up, and its stamp beside it, no supports.
Wash every part in warm soapy water before the first use.
Roll the chilled dough 5 to 6 mm thick between two sheets of baking paper.
Dip a cutter's blade in flour, press straight down with your palm on the rim, and lift.
Dust its stamp, press it into each cookie that cutter cut, about 2 mm deep, and lift it straight up.
Chill the stamped cookies for ten minutes, then bake.
Wash the parts by hand straight after use and let them dry. PLA softens in a dishwasher.
Print details
| Works with | Cookie dough |
|---|---|
| Printed parts | 12 |
| Print bed needed | 204 x 103 mm, 14 mm tall |
| Filament | ~123 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: six cutters with their stamps (6 STL) + print and food-contact sheet + drawings (SVG) + README |
| Added | 2026-10-01 |
Made with the free Cookie cutter generator. Upload your own shape and get the same kind of tool built from it, in your browser.
Free download. Opens the Thingiverse listing in a new tab.
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
Food contact: the cutter only touches dough briefly, but layer lines hold residue. Print it in a food-contact filament, wash it by hand in warm water, and keep it away from the dishwasher. Food-safe guide.
New to this? Read the cutter guide.
Six, each with its own stamp: a champagne bottle, a champagne coupe, an alarm clock at midnight, a firework burst, a top hat and a party popper. The stamps press in the label and star, the bubbles, the clock face and hands, the burst lines, the hat band and the popper stripes.
Yes. The bottle label and the top hat band leave a flat field for it: pipe the year in royal icing once the base has crusted, or press number stamps from the free stamp maker into the dough before baking. The cutters themselves carry no year, so they work every December.
Iced cookies keep about a week in an airtight tin, so bake and decorate them a few days before the party. Let the icing dry overnight before you stack them, with a sheet of baking paper between the layers, so the lustre on the clocks and fireworks does not rub off.
Yes. Every drawing is in the zip as an SVG: upload one to the free cookie cutter generator, switch on Generate stamp and move the Cutter size slider (these are 85 to 95 mm). The stamp scales with its cutter, so its lines still fit the cookie.
Six autumn leaf cookie cutters with vein stamps: maple, oak, ginkgo, birch, sweetgum and linden.
Four cutters that build a gingerbread house: two gables, a side wall and a roof panel, with the door and windows cut in the same press.
Six Christmas village cookie cutters with stamps: cottage, church, townhouse, fir tree, street lamp and wreath.
Six Hanukkah cookie cutters with stamps: menorah, dreidel, Star of David, oil jug, sufganiyah and gelt coin.
Six safari cookie cutters with stamps: elephant, giraffe, lion, hippo, monkey and palm tree.
Six sports ball cookie cutters with stamps: soccer ball, basketball, baseball, American football, tennis ball and volleyball.
Six garden cookie cutters with stamps: sunflower, daisy, tulip, cherry blossom, watering can and bee.
Six farm cookie cutters with stamps: cow, pig, hen, sheep, red barn and tractor.