◆ Cookie dough
Five Christmas ornament cookie cutters with stamps: a round bauble, a drop, an onion dome, an icicle and a heart, each with its cap.
Want your own version? Make it free in our cookie cutter tool. A free account gives you free downloads every week.
Five tree ornaments to bake instead of hang: a round bauble with a zigzag band, a drop with curved stripes, an onion dome with a wavy band, a long icicle ornament with rings and a heart with a smaller heart inside, every one with its little cap on top. Every cutter has a stamp that presses the bands, stripes and dots into the cut cookie, so each ornament is ready to flood in its own colour. Good for Christmas cookie boxes, cookie decorating parties, advent weekends, school bake sales and edible tree decorations.
All five were made with our free cookie cutter generator, not modelled by hand: we drew each shape with its stamp's lines inside it and uploaded it with Generate stamp switched on. The zip holds exactly what the tool gives you, one STL per shape with the cutter (a 0.8 mm blade, 14 mm tall, with a 4 mm rim to press on) and its stamp side by side, plus each drawing as an SVG. The cookies come out 82 x 90 mm (round bauble), 69 x 90 mm (drop bauble), 72 x 90 mm (onion bauble), 49 x 95 mm (icicle ornament) and 71 x 85 mm (heart ornament).
Flood each ornament in a different colour and let it crust, then fill only the pressed bands with gold or silver: brush edible lustre dust mixed with a drop of alcohol into the grooves. Leave the caps plain grey or dusted silver and the cookies look like a box of glass baubles.
The cutters and stamps print flat with no supports, in PLA or PETG. A cutter touches dough for a minute, but a 3D print has fine layer grooves where crumbs can sit: pick a food-contact filament if you can, wash each part by hand in warm soapy water before and after use, never in a dishwasher, and flour the blade and stamp before every press.
Shown as a 3D render of the five printed cutters, their stamps and a stamped cookie from each, not a photo.
Print each file as exported: the cutter rim flat on the bed with the blade pointing up, and its stamp beside it, no supports.
Wash every part in warm soapy water before the first use.
Roll the chilled dough 5 to 6 mm thick between two sheets of baking paper.
Dip a cutter's blade in flour, press straight down with your palm on the rim, and lift.
Dust its stamp, press it into each cookie that cutter cut, about 2 mm deep, and lift it straight up.
Chill the stamped cookies for ten minutes, then bake.
Wash the parts by hand straight after use and let them dry. PLA softens in a dishwasher.
Print details
| Works with | Cookie dough |
|---|---|
| Printed parts | 10 |
| Print bed needed | 195 x 103 mm, 14 mm tall |
| Filament | ~92 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: five cutters with their stamps (5 STL) + print and food-contact sheet + drawings (SVG) + README |
| Added | 2026-11-03 |
Made with the free Cookie cutter generator. Upload your own shape and get the same kind of tool built from it, in your browser.
ZIP: five cutters with their stamps (5 STL) + print and food-contact sheet + drawings (SVG) + README
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
Food contact: the cutter only touches dough briefly, but layer lines hold residue. Print it in a food-contact filament, wash it by hand in warm water, and keep it away from the dishwasher. Food-safe guide.
New to this? Read the cutter guide.
Five baubles, each with a cap and a matching stamp: a round bauble with a zigzag band, a drop with curved stripes, an onion dome with a wavy band, a long icicle ornament with rings and a heart with a heart inside it.
Yes, they are made for it. Push a drinking straw through the cap of each cut cookie before baking to leave a hole, bake, and thread a ribbon through once cool. Iced and dry, they keep on the tree for a couple of weeks in a cool room.
Let the flooded icing dry overnight, then paint the pressed bands and dots with edible gold or silver lustre dust mixed into a paste with a few drops of vodka or lemon extract. The grooves hold the paint, so a steady hand is not needed.
Yes. Every drawing is in the zip as an SVG: upload one to the free cookie cutter generator, switch on Generate stamp and move the Cutter size slider (these are 85 to 95 mm). The stamp scales with its cutter, so its lines still fit the cookie.
Five Scandinavian Christmas cookie cutters with stamps: an eight point star, a folk heart, a fir tree, a knitted mitten and a rosette.
Five Christmas candy cookie cutters with stamps: a peppermint, a wrapped sweet, a lollipop, a candy cane and a gumdrop.
Six autumn leaf cookie cutters with vein stamps: maple, oak, ginkgo, birch, sweetgum and linden.
Four cutters that build a gingerbread house: two gables, a side wall and a roof panel, with the door and windows cut in the same press.
Six Christmas village cookie cutters with stamps: cottage, church, townhouse, fir tree, street lamp and wreath.
Six Hanukkah cookie cutters with stamps: menorah, dreidel, Star of David, oil jug, sufganiyah and gelt coin.
Six New Year's Eve cookie cutters with stamps: champagne bottle, glass, clock at midnight, firework, top hat and party popper.
Six safari cookie cutters with stamps: elephant, giraffe, lion, hippo, monkey and palm tree.