◆ Ink pad

Coffee first stamp

COFFEE FIRST round a steaming cup, a round 48 mm stamp for planners, cafe cups and loyalty cards.

Make your own stamp
3D render of the printed coffee first stamp, face up next to its brown handle, and its brown ink print on a sheet of paper
Ink pad ~13 g Pro early access

A steaming coffee cup on its saucer inside a round border, COFFEE above it and FIRST below. Stamp your planner, a paper cup sleeve, a home cafe's loyalty cards or a note on the office kitchen door.

Read more

Made with our free stamp maker, not modelled by hand: we drew the picture in code, uploaded it, and set the circle shape to 48 mm across; the page traced it into the raised face. The zip holds exactly what the tool gives you: a stamp plate with a 2 mm raised face and a handle that screws into its back, as one STL, and as a 3MF with the face, plate and handle as separate coloured parts. The picture is in the zip too, so you can change it and make your own.

Shown as a 3D render of the printed stamp and the print it makes on paper, not a photo.

What you need

3
  • A stamp pad in the colour you like (water-based for paper, pigment or solvent for glossy card)
  • About 13 g of filament: TPU 95A for the plate gives the best print, PLA or PETG work too
  • Paper, card, kraft bags or tags to stamp on

How to use it

5

  1. Print both parts as exported: the plate face down on the bed, the handle standing on its foot, no supports.

  2. Screw the handle into the back of the plate until it is snug.

  3. Tap the face on the stamp pad a few times so every part of it is evenly inked.

  4. Press straight down with even pressure and lift straight up, without rocking.

  5. Wipe the face with a damp cloth after use, and store it face up.

Print details

1 h 12 minPrint time
~13 gFilament
2Printed parts
48 × 48 × 48 mmSize (W x D x H)
All print details
Print details
Works withInk pad
Printed parts2
Size (W x D x H)48 x 48 x 48 mm
Print bed needed82 x 40 mm, 48 mm tall
Filament~13 g
Layer height0.2 mm
Infill15%
SupportsNot needed
DownloadZIP: stamp and handle (STL + coloured 3MF) + print sheet + artwork (PNG, SVG) + README
Added2026-09-25

Pro early access until October 25, 2026, then free with any account.

Make your own stamp →

Made with the free Custom stamps generator. Upload your own shape and get the same kind of tool built from it, in your browser.

Free for personal use. Selling the pieces you cast needs a commercial licence (Pro or Founder); passing on the file itself is not permitted on any plan. Full terms.

New to casting? Read the stamp guide.

coffee stampcoffee firstplanner stamployalty card stamp3d printed stamp

Questions about this design

Can a small cafe use the coffee first stamp on cups?

On paper cups and sleeves, yes: use a food-safe or solvent ink made for coated paper, and stamp the outside only. For selling stamped cups or cards commercially, check the licence in the zip for what a free account allows.

Will the steam lines of the coffee first stamp print?

Yes, they are over a millimetre wide on the face, which is what a 3D printed stamp needs to carry ink cleanly. Keep the pad lightly inked so the gaps between the lines stay clear.

Can I print the coffee first stamp in one colour?

Yes. The STL is the plate and the handle in one file for any printer. The 3MF keeps the raised face, the plate and the handle as separate parts, so a multi-colour printer can print the face in a contrasting colour and you can read the stamp at a glance.

More designs