◆ Cookie dough
Dinosaur cookie cutter set with stamps
Five dinosaur cookie cutters with stamps: T-rex, stegosaurus, triceratops, long neck and a footprint.
◆ Cookie dough
Five dinosaur cookie cutters with stamps: T-rex, stegosaurus, triceratops, long neck and a footprint.
Five friendly dinosaurs for a dino party: a T-rex with its tiny arms, a stegosaurus with plates along its back, a triceratops with its frill and horns, a long-necked sauropod and a three-toed footprint. Every cutter has a stamp that presses the eye, the spots and the toes into the cookie, and every leg and tail is chunky enough to survive being picked up by a small child. Good for dinosaur birthday parties, kids' party bags, museum days, baby showers and school bake sales.
All five were made with our free cookie cutter generator, not modelled by hand: we drew each shape with its stamp's lines inside it and uploaded it with Generate stamp switched on. The zip holds exactly what the tool gives you, one STL per shape with the cutter (a 0.8 mm blade, 14 mm tall, with a 4 mm rim to press on) and its stamp side by side, plus each drawing as an SVG. The cookies come out 90 x 84 mm (T-rex), 90 x 64 mm (stegosaurus), 90 x 63 mm (triceratops), 90 x 87 mm (long neck) and 79 x 85 mm (dinosaur footprint).
Press the footprint cutter's stamp into the frosting on a sheet cake, again and again, to walk a trail of tracks across it: the stamp works on its own as well as inside its cutter.
The cutters and stamps print flat with no supports, in PLA or PETG. A cutter touches dough for a minute, but a 3D print has fine layer grooves where crumbs can sit: pick a food-contact filament if you can, wash each part by hand in warm soapy water before and after use, never in a dishwasher, and flour the blade and stamp before every press.
Shown as a 3D render of the five printed cutters, their stamps and a stamped cookie from each, not a photo.
Print each file as exported: the cutter rim flat on the bed with the blade pointing up, and its stamp beside it, no supports.
Wash every part in warm soapy water before the first use.
Roll the chilled dough 5 to 6 mm thick between two sheets of baking paper.
Dip a cutter's blade in flour, press straight down with your palm on the rim, and lift.
Dust its stamp, press it into each cookie that cutter cut, about 2 mm deep, and lift it straight up.
Chill the stamped cookies for ten minutes, then bake.
Wash the parts by hand straight after use and let them dry. PLA softens in a dishwasher.
Print details
| Works with | Cookie dough |
|---|---|
| Printed parts | 10 |
| Print bed needed | 204 x 96 mm, 14 mm tall |
| Filament | ~93 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: five cutters with their stamps (5 STL) + print and food-contact sheet + drawings (SVG) + README |
| Added | 2026-09-27 |
Made with the free Cookie cutter generator. Upload your own shape and get the same kind of tool built from it, in your browser.
Free download. Opens the Thingiverse listing in a new tab.
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
Food contact: the cutter only touches dough briefly, but layer lines hold residue. Print it in a food-contact filament, wash it by hand in warm water, and keep it away from the dishwasher. Food-safe guide.
New to this? Read the cutter guide.
A T-rex, a stegosaurus, a triceratops and a long-necked sauropod, plus a three-toed dinosaur footprint. Each has a stamp that presses in the eye, the spots and, on the footprint, the toe lines, so the cookies look finished without icing.
They were drawn chunky for that reason: every leg, tail and horn is several millimetres wide on the cookie. Roll the dough 6 mm thick, lift the cookies with a spatula under the whole body and let them cool on the tray first.
Give them a plain baked dinosaur, a few bowls of runny glaze and clean paintbrushes. The pressed spots and eyes hold the colour, and a quick dip of the whole cookie in green or orange glaze is enough for small hands.
Yes. Every drawing is in the zip as an SVG: upload one to the free cookie cutter generator, switch on Generate stamp and move the Cutter size slider (these are 85 to 90 mm). The stamp scales with its cutter, so its lines still fit the cookie.
Six autumn leaf cookie cutters with vein stamps: maple, oak, ginkgo, birch, sweetgum and linden.
Four cutters that build a gingerbread house: two gables, a side wall and a roof panel, with the door and windows cut in the same press.
Six Christmas village cookie cutters with stamps: cottage, church, townhouse, fir tree, street lamp and wreath.
Six Hanukkah cookie cutters with stamps: menorah, dreidel, Star of David, oil jug, sufganiyah and gelt coin.
Six New Year's Eve cookie cutters with stamps: champagne bottle, glass, clock at midnight, firework, top hat and party popper.
Six safari cookie cutters with stamps: elephant, giraffe, lion, hippo, monkey and palm tree.
Six sports ball cookie cutters with stamps: soccer ball, basketball, baseball, American football, tennis ball and volleyball.
Six garden cookie cutters with stamps: sunflower, daisy, tulip, cherry blossom, watering can and bee.