◆ Soap

Emotional support soap mold

EMOTIONAL SUPPORT SOAP in raised letters on a 90 mm bar, as a silicone mold from printed parts.

Make your own silicone mold Download free on Thingiverse
3D render of the emotional support soap master fused on its printed charcoal base, between the orange and blue walls, with the charcoal clamps behind
Soap ~204 g

A soap bar 90 x 62 mm and about 22 mm thick with a raised border and three lines of bold raised letters: EMOTIONAL SUPPORT SOAP, with SOAP set larger.

Read more

Made with the box mode of our silicone mold maker in its rectangular shape: print the base with the soap master fused onto it face up, the two walls and the clamps, pour about 337 ml of silicone, and the block you get casts the bar face down, so the lettering comes out on the show face and the back stays flat.

A joke bar that sells itself as a gift for a colleague, a new parent or anyone having a week. Pour it in a calm pastel with lavender or chamomile, or pour the letters a darker shade first so the words stand out. The zip carries every printed part, the soap master as its own STL, the tool's own print-settings sheet and a recipe file for the generator.

Shown as a 3D render of the printed mold parts pulled apart around the master, not a photo.

Emotional support soap mold at a glance: every printed part with its size, print time, filament, print settings and the three steps to use it

What you need

3
  • About 369 ml of silicone (mix it in one batch)
  • Melt-and-pour soap base, about 119 ml per bar
  • Pastel soap colour, a calming fragrance and rubbing alcohol in a spray bottle

How to cast it

6

  1. Print the base with the master fused onto it, the two walls and the two clamps.

  2. Stand the base on the table. Set each wall down a few centimetres out from it and slide it in over the table until the ridge round the base sits in the groove at its foot, then slide the clamps down over the seams. Once they are on, the walls cannot lift, and the ridge seals the bottom.

  3. Mix 369 ml of silicone in one batch and pour it into a corner, letting it rise around the master until it covers the top.

  4. Once it has cured, take the clamps off, slide the walls straight out and pull the silicone block off the master. That block is your mold.

  5. Turn the block over. Pour melt-and-pour soap at 55 to 60 C, spray the surface with alcohol to pop the bubbles, and let it set for a few hours.

  6. Flex the silicone and push the bar out from the back. The letters read the right way round on the finished bar.

Print details

6 hPrint time
~204 gFilament
5Printed parts
118 × 90 × 59 mmSize (W x D x H)
All print details
Print details
Cast materialSoap
Printed parts5
Size (W x D x H)118 x 90 x 59 mm
Print bed needed140 x 90 mm, 59 mm tall
Filament~204 g
Layer height0.2 mm
Infill15%
SupportsNot needed
DownloadZIP: 5 printed parts (STL) + soap bar master (STL) + print sheet + recipe
Added2026-09-25
Make your own silicone mold →

Made with the free Silicone mold maker generator. Upload your own model and get the same kind of mold built around it, in your browser.

Download free on Thingiverse

Free download. Opens the Thingiverse listing in a new tab.

Free for personal use. Selling the pieces you cast needs a commercial licence (Pro or Founder); passing on the file itself is not permitted on any plan. Full terms.

New to casting? Read the silicone mold maker guide.

emotional support soap moldfunny soap moldtext soap moldgag gift soapsilicone soap mold stl

Questions about this design

How do I make the letters on the emotional support soap a different colour?

Pour the finished bar in one colour, let it set, then brush a little mica mixed with rubbing alcohol over the raised letters only, or rub a soap-safe colour into them and wipe the flat face clean.

Can I change the text on the emotional support soap?

This file has the text built in. For your own words, upload any bar with your text to our silicone mold maker, or make the lettering with the text sign designer first and use that as the master.

Which scent suits an emotional support soap?

Calming ones: lavender, chamomile, vanilla or a soft cotton scent. It is a gift bar, so a gentle base and a mild fragrance keep it suitable for most people.

More designs

See all soap molds →