◆ Print only
A flat Christmas tree ornament with the whole family on it, one name per branch, in green, white and red.
Want your own version? Make it free in our christmas ornament tool. A free account gives you free downloads every week.
A Christmas tree with the family written down it: four names stacked from the top to the trunk in bold white letters, on a green tree with a raised red trim and red dots like baubles, and a loop at the top for a ribbon. The file says Mom, Dad, Emma and Leo; open it in the free tool and type your own family, up to six names.
Made with our free Christmas ornament generator, not modelled by hand: we picked the tree shape, four names (Mom, Dad, Emma and Leo) on four lines in the Fun & Bold font, the green, white and red colour set, the Snow dots pattern and a height of 100 mm. Everything else is the tool's default. The zip holds exactly what the tool exports: a 3MF with every part in its own colour, and the same print as one STL. Like every free download from the tool, it carries a small MESHCAST mark where it does not show.
Print it flat, face up, with no supports, thread a ribbon through the loop and it is on the tree the same evening. Print one for everyone at the table, or open the tool and change the words first.
Shown as a 3D render of the printed ornament, lying flat as it comes off the bed, not a photo.
Print it flat, face up, as exported. No supports.
For two colours on one nozzle, change filament at the height in the README: the letters and the trim start there.
Pull off any stringing round the letters with tweezers.
Thread a ribbon, twine or an ornament hook through the loop at the top.
Print details
| Type | Print only |
|---|---|
| Printed parts | 1 |
| Size (W x D x H) | 70 x 108 x 3.4 mm |
| Print bed needed | 108 x 71 mm, 4 mm tall |
| Filament | ~11 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: 3MF in colour + STL + README |
| Added | 2026-11-03 |
Made with the free Christmas ornament generator. Upload your own drawing and get the same kind of part built from it, in your browser.
ZIP: 3MF in colour + STL + README
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
New to this? Read the christmas ornament guide.
Up to six lines in the free Christmas ornament generator. The tool sizes every line to fit the tree, widest at the bottom, so four short names in a bold font read well at 100 mm; for a bigger family, make the ornament taller still with the size slider.
About 30 min and 11 g of PLA at 0.2 mm layers, estimated from the files rather than sliced, so a current printer is often faster. It prints flat in one piece with no supports, so it suits a first print on any printer.
It is 70 by 108 mm and 3.4 mm thick. To change that, open the free Christmas ornament generator from this page and move the size slider; the rest of the design follows, and you download the new file in a minute.
A flat five point star that says Merry Christmas, in red, white and gold, with a loop for the ribbon.
A flat ball ornament for a baby's first Christmas, in navy, white and silver, ready for the baby's name.
A round 80 mm bauble cut into crisp facets like ice, with a raised silver snowflake, printed in two halves.
An onion dome bauble with a twisting spiral and Noel in raised white script, printed in two halves.
A gingerbread house that never goes stale: flat panels with the icing printed on, glued together in an afternoon.
A little cottage with snow on the roof that glows over an LED tealight, printed in one piece.
A flat heart ornament for a couple's first Christmas together, in red, white and gold.
A paw print ornament for the dog or cat's stocking, in gingerbread brown and white, ready for the pet's name.