◆ Cookie dough
Gift box cookie cutter and stamp
A wrapped present with a bow on top, and a stamp that presses in the lid, the ribbon and the bow.
◆ Cookie dough
A wrapped present with a bow on top, and a stamp that presses in the lid, the ribbon and the bow.
A present with a lid, a ribbon running down the middle and a big two-loop bow on top. The stamp presses in a border line, the edge of the lid, both sides of the ribbon and the loops and knot of the bow. Good for Christmas, birthdays, Secret Santa, baby showers and any cookie box that is itself the present. The cookie comes out about 89 by 90 mm.
Made with our free cookie cutter generator, not modelled by hand: we drew the shape with the stamp's lines inside it, uploaded it to the tool, set the cutter size to 90 mm and switched on Generate stamp. The STL in the zip is exactly what the tool gives you: the cutter (a 0.8 mm blade, 14 mm tall, with a 4 mm rim to press on) and, next to it, the stamp that drops inside the cutter and presses the lines into the cut cookie. Both print flat, with no supports. The drawing is in the zip too, as an SVG, so you can make both bigger or smaller.
Nothing about the shape says Christmas until you ice it: red and green make it a Christmas present, pastels and sprinkles a birthday gift, white and silver a wedding favour.
Shown as a 3D render of the printed cutter and stamp and two stamped cookies, not a photo.
Print the file as exported: the cutter rim flat on the bed with the blade pointing up, and the stamp beside it, no supports.
Wash both parts in warm soapy water before the first use.
Roll the chilled dough 5 to 6 mm thick between two sheets of baking paper.
Dip the blade in flour, press straight down with your palm on the rim, and lift.
Dust the stamp, press it pattern side down into each cut cookie about 2 mm deep, and lift it straight up.
Chill the stamped cookies for ten minutes, then bake.
Wash both parts by hand straight after use and let them dry. PLA softens in a dishwasher.
Print details
| Works with | Cookie dough |
|---|---|
| Printed parts | 2 |
| Size (W x D x H) | 202 x 98 x 14 mm |
| Print bed needed | 202 x 98 mm, 14 mm tall |
| Filament | ~28 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: cutter and stamp (STL) + print and food-contact sheet + silhouette (SVG) + README |
| Added | 2026-09-26 |
Pro early access until October 26, 2026, then free with any account.
Like it or post your print on Thingiverse
Make your own cookie cutter →Made with the free Cookie cutter generator. Upload your own shape and get the same kind of tool built from it, in your browser.
Free for personal use. Selling the pieces you cast needs a commercial licence (Pro or Founder); passing on the file itself is not permitted on any plan. Full terms.
New to casting? Read the cutter guide.
Yes, it is as much a birthday cutter as a Christmas one. Ice the boxes in pastels with a white ribbon, add sprinkles, and they suit a birthday tray, a baby shower or a thank-you box just as well.
Flood the box first and let it set for an hour, then fill the pressed ribbon and the bow loops in a contrasting colour. The two stamped lines of the ribbon keep it straight and even from the lid to the base.
Yes. Upload present.svg from the zip to the free cookie cutter generator, switch on Generate stamp, and move the Cutter size slider (this one is 90 mm). The stamp scales with the cutter, so its lines still fit the cookie.
Pro early access
A Christmas stocking cutter with a matching stamp that presses in the cuff, heel, toe and a star.
Pro early access
A Christmas bell on its rim with a clapper, and a stamp that presses in two bands and a star.
Pro early access
A reindeer head with chunky antlers, and a stamp that presses in the eyes, ears and a big round nose.
Pro early access
A round Christmas bauble with its cap, and a stamp that presses in two bands, a zigzag and dots.
Pro early access
Two holly leaves and three berries, with a stamp that presses in the leaf veins and the berries.
Pro early access
An ugly Christmas sweater cutter with a stamp for the ribbing, a zigzag band and a little tree.
Pro early access
A floppy Santa hat with a fur brim and a pompom, and a stamp that presses in the brim and the fur.
Pro early access
A round little penguin with flippers and feet, and a stamp that presses in its face, belly, eyes and beak.