◆ Ink pad

I need beer stamp

I NEED BEER round a foaming beer mug, a round 48 mm stamp for coasters, party invites and Friday afternoons.

Make your own stamp
3D render of the printed i need beer stamp, face up next to its brown handle, and its amber ink print on a sheet of paper
Ink pad ~13 g Pro early access

A foaming beer mug in the middle of a round border, I NEED above it and BEER below. Stamp beer mats and coasters, barbecue invitations, a home-brew label or the last page of the week's to-do list.

Read more

Made with our free stamp maker, not modelled by hand: we drew the picture in code, uploaded it, and set the circle shape to 48 mm across; the page traced it into the raised face. The zip holds exactly what the tool gives you: a stamp plate with a 2 mm raised face and a handle that screws into its back, as one STL, and as a 3MF with the face, plate and handle as separate coloured parts. The picture is in the zip too, so you can change it and make your own.

Shown as a 3D render of the printed stamp and the print it makes on paper, not a photo.

What you need

3
  • A stamp pad in the colour you like (water-based for paper, pigment or solvent for glossy card)
  • About 13 g of filament: TPU 95A for the plate gives the best print, PLA or PETG work too
  • Paper, card, kraft bags or tags to stamp on

How to use it

5

  1. Print both parts as exported: the plate face down on the bed, the handle standing on its foot, no supports.

  2. Screw the handle into the back of the plate until it is snug.

  3. Tap the face on the stamp pad a few times so every part of it is evenly inked.

  4. Press straight down with even pressure and lift straight up, without rocking.

  5. Wipe the face with a damp cloth after use, and store it face up.

Print details

1 h 13 minPrint time
~13 gFilament
2Printed parts
48 × 48 × 48 mmSize (W x D x H)
All print details
Print details
Works withInk pad
Printed parts2
Size (W x D x H)48 x 48 x 48 mm
Print bed needed82 x 40 mm, 48 mm tall
Filament~13 g
Layer height0.2 mm
Infill15%
SupportsNot needed
DownloadZIP: stamp and handle (STL + coloured 3MF) + print sheet + artwork (PNG, SVG) + README
Added2026-09-25

Pro early access until October 25, 2026, then free with any account.

Make your own stamp →

Made with the free Custom stamps generator. Upload your own shape and get the same kind of tool built from it, in your browser.

Free for personal use. Selling the pieces you cast needs a commercial licence (Pro or Founder); passing on the file itself is not permitted on any plan. Full terms.

New to casting? Read the stamp guide.

beer stampfunny stampparty stamphome brew label stamp3d printed stamp

Questions about this design

Can I stamp beer mats with the I need beer stamp?

Yes, cardboard beer mats take ink very well. Use a pigment or solvent pad so the print does not smudge when the mat gets wet, and let it dry fully before you use it.

How was the I need beer stamp made?

We drew the mug and the lettering in code and uploaded the picture to our free stamp maker, which traced it into a raised face with a round plate and a screw-on handle. The picture is in the zip, so you can change it and make your own.

Can I print the i need beer stamp in one colour?

Yes. The STL is the plate and the handle in one file for any printer. The 3MF keeps the raised face, the plate and the handle as separate parts, so a multi-colour printer can print the face in a contrasting colour and you can read the stamp at a glance.

More designs