◆ Sealing wax
Rose wax seal stamp
A rose seen from above with two leaves, on a 28 mm wax seal stamp for invitations and letters.
◆ Sealing wax
A rose seen from above with two leaves, on a 28 mm wax seal stamp for invitations and letters.
A rose seen from above: a scalloped ring of outer petals, the heart wound in by a spiral, and a leaf either side, raised on a 28 mm seal. Seal wedding and bridal shower invitations, Mother's Day and Valentine's cards, florist tags and the wrapping of a bouquet.
Made with our free stamp maker, not modelled by hand: we drew the design in code, knocked out of a solid disc, uploaded the picture and set the circle shape to 28 mm across with the relief at 1 mm, enough for wax without trapping it. The page traced it into the face, so the design is cut into the stamp and stands proud on the seal. The zip holds exactly what the tool gives you: a stamp plate with a 1 mm raised face and a handle that screws into its back, as one STL, and as a 3MF with the face, plate and handle as separate coloured parts. The page mirrors the face, so the mark reads the right way round, and flares every raised wall a little toward the plate, which helps the stamp let go of warm sealing wax. The picture is in the zip too, so you can change it and make your own.
Shown as a 3D render of the printed stamp and the seal it presses into a puddle of wax, not a photo.
Print both parts as exported: the plate face down on the bed, the handle standing on its foot, no supports.
Screw the handle into the back of the plate until it is snug.
Chill the face on an ice pack for a minute.
Pour a puddle of wax a little wider than the seal, wait about ten seconds, then press the stamp straight down and hold it still for 10 to 20 seconds.
Lift straight up once the wax has set, and chill the stamp again before the next seal.
Print details
| Works with | Sealing wax |
|---|---|
| Printed parts | 2 |
| Size (W x D x H) | 28 x 28 x 47 mm |
| Print bed needed | 62 x 39 mm, 28 mm tall |
| Filament | ~8 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: stamp and handle (STL + coloured 3MF) + print sheet + artwork (PNG, SVG) + README |
| Added | 2026-09-27 |
Made with the free Custom stamps generator. Upload your own shape and get the same kind of tool built from it, in your browser.
Free download. Opens the Thingiverse listing in a new tab.
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
New to this? Read the stamp guide.
Let the puddle of wax cool for about ten seconds before you press, until its surface just loses its shine. Wax that is too hot flows back into the spiral groove as you lift; wax that is too cold cracks round the edge.
Yes. Seal the paper where it overlaps, or a ribbon tail, with flexible glue-gun sealing wax: it bends with the paper instead of snapping. Keep the seal out of the water the stems stand in.
PETG for the plate if you have it: it stays stiff to about 80 C, where PLA softens near 60 C, and a fresh puddle of sealing wax is hotter than that for a few seconds. PLA works too if you chill the plate between seals. Skip TPU: a soft face blurs the design.
Sealing wax
Six spooky wax seal stamps: a pumpkin, a bat, a ghost, a web, a witch hat and a skull, one screw-on handle and a 28 mm plate each.
Sealing wax
Six Christmas wax seal stamps, from a tree to a candy cane: one screw-on handle and a 28 mm plate for each.
Sealing wax
Six leaf and flower wax seal stamps for botanical stationery: one screw-on handle and a 28 mm plate for each.
Sealing wax
The first six star signs, Aries to Virgo, as zodiac wax seal stamps: one screw-on handle and a 28 mm plate per sign.
Sealing wax
The last six star signs, Libra to Pisces, as zodiac wax seal stamps: one screw-on handle and a 28 mm plate per sign.
Sealing wax
A raised heart in a ring of dots: a 28 mm wax seal stamp for wedding invitations and love letters.
Sealing wax
A striped bee with four wings, raised on a 28 mm wax seal stamp, for letters, honey jars and gift wrap.
Sealing wax
A crescent moon and three stars on a 28 mm wax seal stamp: celestial seals for letters, tarot and journals.