◆ Cookie dough
Unicorn and princess cookie cutter set with stamps
Six fairy tale cookie cutters with stamps: unicorn, castle, crown, magic wand, rainbow and princess dress.
◆ Cookie dough
Six fairy tale cookie cutters with stamps: unicorn, castle, crown, magic wand, rainbow and princess dress.
Six fairy tale shapes for a unicorn or princess party: a unicorn's head with a spiral horn and a curly mane, a castle with two turrets and an arched door, a crown with jewels, a star-tipped magic wand, a rainbow on two clouds and a ball gown. Every cutter has a stamp that presses the mane, the windows, the jewels or the stripes into the cut cookie. Good for unicorn and princess birthdays, fairy tale parties, baby showers, dress-up days and party favour bags.
All six were made with our free cookie cutter generator, not modelled by hand: we drew each shape with its stamp's lines inside it and uploaded it with Generate stamp switched on. The zip holds exactly what the tool gives you, one STL per shape with the cutter (a 0.8 mm blade, 14 mm tall, with a 4 mm rim to press on) and its stamp side by side, plus each drawing as an SVG. The cookies come out 80 x 95 mm (unicorn), 90 x 86 mm (castle), 85 x 66 mm (crown), 72 x 90 mm (magic wand), 90 x 63 mm (rainbow) and 88 x 90 mm (princess dress).
Pastel icing and edible glitter do most of the work: flood the unicorn white, fill the mane grooves in pink, lilac and teal, and brush the horn, crown and wand with gold lustre dust mixed with a drop of clear alcohol once the icing has set.
The cutters and stamps print flat with no supports, in PLA or PETG. A cutter touches dough for a minute, but a 3D print has fine layer grooves where crumbs can sit: pick a food-contact filament if you can, wash each part by hand in warm soapy water before and after use, never in a dishwasher, and flour the blade and stamp before every press.
Shown as a 3D render of the six printed cutters, their stamps and a stamped cookie from each, not a photo.
Print each file as exported: the cutter rim flat on the bed with the blade pointing up, and its stamp beside it, no supports.
Wash every part in warm soapy water before the first use.
Roll the chilled dough 5 to 6 mm thick between two sheets of baking paper.
Dip a cutter's blade in flour, press straight down with your palm on the rim, and lift.
Dust its stamp, press it into each cookie that cutter cut, about 2 mm deep, and lift it straight up.
Chill the stamped cookies for ten minutes, then bake.
Wash the parts by hand straight after use and let them dry. PLA softens in a dishwasher.
Print details
| Works with | Cookie dough |
|---|---|
| Printed parts | 12 |
| Print bed needed | 204 x 103 mm, 14 mm tall |
| Filament | ~122 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: six cutters with their stamps (6 STL) + print and food-contact sheet + drawings (SVG) + README |
| Added | 2026-09-28 |
Made with the free Cookie cutter generator. Upload your own shape and get the same kind of tool built from it, in your browser.
Free download. Opens the Thingiverse listing in a new tab.
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
Food contact: the cutter only touches dough briefly, but layer lines hold residue. Print it in a food-contact filament, wash it by hand in warm water, and keep it away from the dishwasher. Food-safe guide.
New to this? Read the cutter guide.
Six, each with a stamp: a unicorn head, a castle, a crown, a magic wand, a rainbow on clouds and a princess dress. The stamps press in the unicorn's eye, horn and mane, the castle door and windows, the crown jewels, the wand star, the rainbow bands and the dress folds.
No: the horn is drawn wide at its base and ends in a rounded tip about 7 mm across on the cookie, so it bakes through with the head and does not snap. Lift the cut cookie by the neck and mane with a spatula, not by the horn.
Yes. Bake one of each shape per guest, let the icing dry overnight, and pack them in clear cellophane bags tied with ribbon. Iced cookies keep about a week in a sealed bag, so they can be made a few days before the party.
Yes. Every drawing is in the zip as an SVG: upload one to the free cookie cutter generator, switch on Generate stamp and move the Cutter size slider (these are 85 to 95 mm). The stamp scales with its cutter, so its lines still fit the cookie.
Six autumn leaf cookie cutters with vein stamps: maple, oak, ginkgo, birch, sweetgum and linden.
Four cutters that build a gingerbread house: two gables, a side wall and a roof panel, with the door and windows cut in the same press.
Six Christmas village cookie cutters with stamps: cottage, church, townhouse, fir tree, street lamp and wreath.
Six Hanukkah cookie cutters with stamps: menorah, dreidel, Star of David, oil jug, sufganiyah and gelt coin.
Six New Year's Eve cookie cutters with stamps: champagne bottle, glass, clock at midnight, firework, top hat and party popper.
Six safari cookie cutters with stamps: elephant, giraffe, lion, hippo, monkey and palm tree.
Six sports ball cookie cutters with stamps: soccer ball, basketball, baseball, American football, tennis ball and volleyball.
Six garden cookie cutters with stamps: sunflower, daisy, tulip, cherry blossom, watering can and bee.