◆ Cookie dough

Valentine's cookie cutter set with stamps

Five Valentine's cookie cutters with stamps: XO heart, love letter, heart and arrow, lips and a rose.

Make your own cookie cutter
3D render of five 3D-printed Valentine's cookie cutters with their stamps and a golden stamped cookie in front of each: XO heart, love letter, heart and arrow, lips and rose
Cookie dough ~89 g Pro early access

Five shapes for Valentine's Day: a heart stamped with XO and a little heart, a love letter sealed with a heart, a heart with Cupid's arrow through it, a pair of lips and a rose on its stem. Every cutter has a stamp that presses the letters, the envelope flap, the arrow, the lip line or the rose petals into the cookie. Good for Valentine's Day, Galentine's, anniversaries, engagement parties and school Valentine's swaps.

Read more

All five were made with our free cookie cutter generator, not modelled by hand: we drew each shape with its stamp's lines inside it and uploaded it with Generate stamp switched on. The zip holds exactly what the tool gives you, one STL per shape with the cutter (a 0.8 mm blade, 14 mm tall, with a 4 mm rim to press on) and its stamp side by side, plus each drawing as an SVG. The cookies come out 85 x 78 mm (XO heart), 85 x 59 mm (love letter), 85 x 65 mm (heart and arrow), 85 x 40 mm (lips) and 58 x 90 mm (rose).

Bake a batch in two doughs, plain and cocoa, and ice only the pressed lines in red or white: a box of stamped hearts, letters and roses looks finished with a fraction of the piping.

The cutters and stamps print flat with no supports, in PLA or PETG. A cutter touches dough for a minute, but a 3D print has fine layer grooves where crumbs can sit: pick a food-contact filament if you can, wash each part by hand in warm soapy water before and after use, never in a dishwasher, and flour the blade and stamp before every press.

Shown as a 3D render of the five printed cutters, their stamps and a stamped cookie from each, not a photo.

Valentine's cookie cutter set with stamps at a glance: every printed part with its size, print time, filament, print settings and the three steps to use it

What you need

4
  • Rolled cookie dough that holds its shape: sugar cookie, shortbread or gingerbread, with little or no baking powder
  • A rolling pin, and two 5 to 6 mm guides for an even thickness
  • Flour or cornflour for dusting the cutters and the stamps, and baking paper
  • About 89 g of PLA or PETG for the whole set, ideally a food-contact filament

How to use it

7

  1. Print each file as exported: the cutter rim flat on the bed with the blade pointing up, and its stamp beside it, no supports.

  2. Wash every part in warm soapy water before the first use.

  3. Roll the chilled dough 5 to 6 mm thick between two sheets of baking paper.

  4. Dip a cutter's blade in flour, press straight down with your palm on the rim, and lift.

  5. Dust its stamp, press it into each cookie that cutter cut, about 2 mm deep, and lift it straight up.

  6. Chill the stamped cookies for ten minutes, then bake.

  7. Wash the parts by hand straight after use and let them dry. PLA softens in a dishwasher.

Print details

9 h 35 minPrint time
~89 gFilament
10Printed parts
All print details
Print details
Works withCookie dough
Printed parts10
Print bed needed194 x 98 mm, 14 mm tall
Filament~89 g
Layer height0.2 mm
Infill15%
SupportsNot needed
DownloadZIP: five cutters with their stamps (5 STL) + print and food-contact sheet + drawings (SVG) + README
Added2026-09-27

Pro early access until October 27, 2026, then free with any account.

Like it or post your print on Thingiverse

Make your own cookie cutter →

Made with the free Cookie cutter generator. Upload your own shape and get the same kind of tool built from it, in your browser.

Free for personal use. Selling the pieces you cast needs a commercial licence (Pro or Founder); passing on the file itself is not permitted on any plan. Full terms.

New to casting? Read the cutter guide.

valentines cookie cutter setvalentines day cookie cuttersheart cookie cutter and stamplove letter cookie cutterlips cookie cutter

Questions about this design

Which shapes are in the Valentine's cookie cutter set?

Five, each with its stamp: a heart with XO, a love letter envelope, a heart pierced by an arrow, a pair of lips and a long-stemmed rose. The stamps press in the letters, the flap and seal, the arrow shaft, the lip line and the petals.

Can I write a name on the Valentine's cookie cutter set's love letter?

Yes, the envelope is the one made for it: flood it white, let it dry hard, then write a name or a short word on the lower half with a fine tip or an edible pen. The pressed flap and heart seal frame it.

How far ahead can I bake the Valentine's cookies?

Plain stamped cookies keep for a week in an airtight tin, and iced ones for as long once the icing is hard. Bake them the weekend before, ice them midweek and bag them one by one with a ribbon on the day.

Can I make the cutters in the Valentine's cookie cutter set bigger or smaller?

Yes. Every drawing is in the zip as an SVG: upload one to the free cookie cutter generator, switch on Generate stamp and move the Cutter size slider (these are 85 to 90 mm). The stamp scales with its cutter, so its lines still fit the cookie.

More designs

See all cookie cutters →