◆ Cookie dough
Wedding cookie cutter set with stamps
Five wedding cookie cutters with stamps: dress, three-tier cake, rings, suit and champagne glasses.
◆ Cookie dough
Five wedding cookie cutters with stamps: dress, three-tier cake, rings, suit and champagne glasses.
Five shapes for a wedding or a bridal shower: a strapless dress with a sash and a lace hem, a three-tier cake with drapes and a heart on top, two interlocked rings with a diamond, a suit with lapels and a bow tie, and two champagne glasses clinking. Every cutter has a stamp that presses the details in, so a tray of favours needs little more than white icing. Good for wedding favours, bridal and couples showers, engagement parties, hen and stag parties and anniversaries.
All five were made with our free cookie cutter generator, not modelled by hand: we drew each shape with its stamp's lines inside it and uploaded it with Generate stamp switched on. The zip holds exactly what the tool gives you, one STL per shape with the cutter (a 0.8 mm blade, 14 mm tall, with a 4 mm rim to press on) and its stamp side by side, plus each drawing as an SVG. The cookies come out 90 x 86 mm (wedding dress), 84 x 90 mm (wedding cake), 85 x 71 mm (wedding rings), 77 x 85 mm (suit and bow tie) and 75 x 85 mm (champagne glasses).
Ice the whole set in white and ivory and pick out only the pressed lines in gold with edible lustre dust mixed with a drop of lemon extract: elegant, and quick enough for a hundred favours.
The cutters and stamps print flat with no supports, in PLA or PETG. A cutter touches dough for a minute, but a 3D print has fine layer grooves where crumbs can sit: pick a food-contact filament if you can, wash each part by hand in warm soapy water before and after use, never in a dishwasher, and flour the blade and stamp before every press.
Shown as a 3D render of the five printed cutters, their stamps and a stamped cookie from each, not a photo.
Print each file as exported: the cutter rim flat on the bed with the blade pointing up, and its stamp beside it, no supports.
Wash every part in warm soapy water before the first use.
Roll the chilled dough 5 to 6 mm thick between two sheets of baking paper.
Dip a cutter's blade in flour, press straight down with your palm on the rim, and lift.
Dust its stamp, press it into each cookie that cutter cut, about 2 mm deep, and lift it straight up.
Chill the stamped cookies for ten minutes, then bake.
Wash the parts by hand straight after use and let them dry. PLA softens in a dishwasher.
Print details
| Works with | Cookie dough |
|---|---|
| Printed parts | 10 |
| Print bed needed | 204 x 98 mm, 14 mm tall |
| Filament | ~110 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: five cutters with their stamps (5 STL) + print and food-contact sheet + drawings (SVG) + README |
| Added | 2026-09-27 |
Pro early access until October 27, 2026, then free with any account.
Like it or post your print on Thingiverse
Make your own cookie cutter →Made with the free Cookie cutter generator. Upload your own shape and get the same kind of tool built from it, in your browser.
Free for personal use. Selling the pieces you cast needs a commercial licence (Pro or Founder); passing on the file itself is not permitted on any plan. Full terms.
New to casting? Read the cutter guide.
Five, each with a stamp: a wedding dress, a three-tier wedding cake, a pair of wedding rings, a suit with a bow tie and two champagne glasses. The stamps press in the sash and lace, the cake drapes, the rings, the lapels and the bubbles.
A batch of about 900 g of sugar cookie dough rolled 6 mm thick gives 20 to 24 cookies at this size. For a hundred guests bake five batches over two days; stamped cookies keep a week in a tin, so start early.
Yes. Roll fondant 3 to 4 mm thick, dust the stamp with cornflour, press it in, then cut round it with the cutter. The rings, glasses and dresses make neat toppers for cupcakes or appliques on the side of a cake.
Yes. Every drawing is in the zip as an SVG: upload one to the free cookie cutter generator, switch on Generate stamp and move the Cutter size slider (these are 85 to 90 mm). The stamp scales with its cutter, so its lines still fit the cookie.
Pro early access
Six Halloween cookie cutters, each with a stamp: jack-o'-lantern, ghost, bat, witch hat, cauldron and candy corn.
Pro early access
Five Thanksgiving cookie cutters with stamps: turkey, slice of pie, acorn, oak leaf and pumpkin.
Pro early access
Five winter cookie cutters with stamps: snowman, mitten, beanie hat, mug of cocoa and snowflake.
Pro early access
Five Easter cookie cutters with stamps: a decorated egg, bunny, hatching chick, carrot and tulip.
Pro early access
Five Valentine's cookie cutters with stamps: XO heart, love letter, heart and arrow, lips and a rose.
Pro early access
Five baby shower cookie cutters with stamps: onesie, baby bottle, rattle, pram and a rubber duck.
Pro early access
Five birthday cookie cutters with stamps: cake with a candle, balloon, party hat, cupcake and ice cream.
Pro early access
Five dinosaur cookie cutters with stamps: T-rex, stegosaurus, triceratops, long neck and a footprint.