◆ Cookie dough
Wedding cookie cutter set with stamps
Five wedding cookie cutters with stamps: dress, three-tier cake, rings, suit and champagne glasses.
◆ Cookie dough
Five wedding cookie cutters with stamps: dress, three-tier cake, rings, suit and champagne glasses.
Five shapes for a wedding or a bridal shower: a strapless dress with a sash and a lace hem, a three-tier cake with drapes and a heart on top, two interlocked rings with a diamond, a suit with lapels and a bow tie, and two champagne glasses clinking. Every cutter has a stamp that presses the details in, so a tray of favours needs little more than white icing. Good for wedding favours, bridal and couples showers, engagement parties, hen and stag parties and anniversaries.
All five were made with our free cookie cutter generator, not modelled by hand: we drew each shape with its stamp's lines inside it and uploaded it with Generate stamp switched on. The zip holds exactly what the tool gives you, one STL per shape with the cutter (a 0.8 mm blade, 14 mm tall, with a 4 mm rim to press on) and its stamp side by side, plus each drawing as an SVG. The cookies come out 90 x 86 mm (wedding dress), 84 x 90 mm (wedding cake), 85 x 71 mm (wedding rings), 77 x 85 mm (suit and bow tie) and 75 x 85 mm (champagne glasses).
Ice the whole set in white and ivory and pick out only the pressed lines in gold with edible lustre dust mixed with a drop of lemon extract: elegant, and quick enough for a hundred favours.
The cutters and stamps print flat with no supports, in PLA or PETG. A cutter touches dough for a minute, but a 3D print has fine layer grooves where crumbs can sit: pick a food-contact filament if you can, wash each part by hand in warm soapy water before and after use, never in a dishwasher, and flour the blade and stamp before every press.
Shown as a 3D render of the five printed cutters, their stamps and a stamped cookie from each, not a photo.
Print each file as exported: the cutter rim flat on the bed with the blade pointing up, and its stamp beside it, no supports.
Wash every part in warm soapy water before the first use.
Roll the chilled dough 5 to 6 mm thick between two sheets of baking paper.
Dip a cutter's blade in flour, press straight down with your palm on the rim, and lift.
Dust its stamp, press it into each cookie that cutter cut, about 2 mm deep, and lift it straight up.
Chill the stamped cookies for ten minutes, then bake.
Wash the parts by hand straight after use and let them dry. PLA softens in a dishwasher.
Print details
| Works with | Cookie dough |
|---|---|
| Printed parts | 10 |
| Print bed needed | 204 x 98 mm, 14 mm tall |
| Filament | ~110 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: five cutters with their stamps (5 STL) + print and food-contact sheet + drawings (SVG) + README |
| Added | 2026-09-27 |
Made with the free Cookie cutter generator. Upload your own shape and get the same kind of tool built from it, in your browser.
Free download. Opens the Thingiverse listing in a new tab.
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
Food contact: the cutter only touches dough briefly, but layer lines hold residue. Print it in a food-contact filament, wash it by hand in warm water, and keep it away from the dishwasher. Food-safe guide.
New to this? Read the cutter guide.
Five, each with a stamp: a wedding dress, a three-tier wedding cake, a pair of wedding rings, a suit with a bow tie and two champagne glasses. The stamps press in the sash and lace, the cake drapes, the rings, the lapels and the bubbles.
A batch of about 900 g of sugar cookie dough rolled 6 mm thick gives 20 to 24 cookies at this size. For a hundred guests bake five batches over two days; stamped cookies keep a week in a tin, so start early.
Yes. Roll fondant 3 to 4 mm thick, dust the stamp with cornflour, press it in, then cut round it with the cutter. The rings, glasses and dresses make neat toppers for cupcakes or appliques on the side of a cake.
Yes. Every drawing is in the zip as an SVG: upload one to the free cookie cutter generator, switch on Generate stamp and move the Cutter size slider (these are 85 to 90 mm). The stamp scales with its cutter, so its lines still fit the cookie.
Six autumn leaf cookie cutters with vein stamps: maple, oak, ginkgo, birch, sweetgum and linden.
Four cutters that build a gingerbread house: two gables, a side wall and a roof panel, with the door and windows cut in the same press.
Six Christmas village cookie cutters with stamps: cottage, church, townhouse, fir tree, street lamp and wreath.
Six Hanukkah cookie cutters with stamps: menorah, dreidel, Star of David, oil jug, sufganiyah and gelt coin.
Six New Year's Eve cookie cutters with stamps: champagne bottle, glass, clock at midnight, firework, top hat and party popper.
Six safari cookie cutters with stamps: elephant, giraffe, lion, hippo, monkey and palm tree.
Six sports ball cookie cutters with stamps: soccer ball, basketball, baseball, American football, tennis ball and volleyball.
Six garden cookie cutters with stamps: sunflower, daisy, tulip, cherry blossom, watering can and bee.