◆ Cookie dough
Winter cookie cutter set with stamps
Five winter cookie cutters with stamps: snowman, mitten, beanie hat, mug of cocoa and snowflake.
◆ Cookie dough
Five winter cookie cutters with stamps: snowman, mitten, beanie hat, mug of cocoa and snowflake.
Five cosy winter shapes that work from the first frost to February: a snowman with a top hat and scarf, a mitten with a ribbed cuff, a knitted beanie with a pompom, a mug of hot cocoa with marshmallows and a six-arm snowflake. Every cutter has a stamp that presses the knit, the face, the heart or the snowflake lines into the cookie. Good for winter birthdays, Christmas and New Year cookie boxes, ski trips, hot chocolate bars and snow days.
All five were made with our free cookie cutter generator, not modelled by hand: we drew each shape with its stamp's lines inside it and uploaded it with Generate stamp switched on. The zip holds exactly what the tool gives you, one STL per shape with the cutter (a 0.8 mm blade, 14 mm tall, with a 4 mm rim to press on) and its stamp side by side, plus each drawing as an SVG. The cookies come out 41 x 90 mm (snowman), 65 x 85 mm (mitten), 85 x 83 mm (beanie hat), 84 x 85 mm (mug of cocoa) and 76 x 85 mm (snowflake).
None of these five says Christmas, so they carry on long after the tree comes down: bake them for January birthdays, a ski weekend or a hot chocolate bar, in blues, whites and silvers.
The cutters and stamps print flat with no supports, in PLA or PETG. A cutter touches dough for a minute, but a 3D print has fine layer grooves where crumbs can sit: pick a food-contact filament if you can, wash each part by hand in warm soapy water before and after use, never in a dishwasher, and flour the blade and stamp before every press.
Shown as a 3D render of the five printed cutters, their stamps and a stamped cookie from each, not a photo.
Print each file as exported: the cutter rim flat on the bed with the blade pointing up, and its stamp beside it, no supports.
Wash every part in warm soapy water before the first use.
Roll the chilled dough 5 to 6 mm thick between two sheets of baking paper.
Dip a cutter's blade in flour, press straight down with your palm on the rim, and lift.
Dust its stamp, press it into each cookie that cutter cut, about 2 mm deep, and lift it straight up.
Chill the stamped cookies for ten minutes, then bake.
Wash the parts by hand straight after use and let them dry. PLA softens in a dishwasher.
Print details
| Works with | Cookie dough |
|---|---|
| Printed parts | 10 |
| Print bed needed | 194 x 98 mm, 14 mm tall |
| Filament | ~101 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: five cutters with their stamps (5 STL) + print and food-contact sheet + drawings (SVG) + README |
| Added | 2026-09-27 |
Made with the free Cookie cutter generator. Upload your own shape and get the same kind of tool built from it, in your browser.
Free download. Opens the Thingiverse listing in a new tab.
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
Food contact: the cutter only touches dough briefly, but layer lines hold residue. Print it in a food-contact filament, wash it by hand in warm water, and keep it away from the dishwasher. Food-safe guide.
New to this? Read the cutter guide.
A snowman, a mitten, a beanie hat, a mug of hot cocoa and a snowflake, each with a stamp that drops inside it. The stamps press the snowman's face and buttons, the cuffs and knit, the marshmallows and heart, and the snowflake's arms.
No, that is the point of it: none of the shapes is a Christmas symbol, so the same set works for New Year, January birthdays, snow days and ski trips. Ice them in blue and white instead of red and green.
Flood the cookie and let the icing crust for an hour, then pipe thin lines of a second colour along the pressed ribbing, or brush the plain baked cookie with thinned food colouring and wipe the surface so the colour stays in the grooves.
Yes. Every drawing is in the zip as an SVG: upload one to the free cookie cutter generator, switch on Generate stamp and move the Cutter size slider (these are 85 to 90 mm). The stamp scales with its cutter, so its lines still fit the cookie.
Six autumn leaf cookie cutters with vein stamps: maple, oak, ginkgo, birch, sweetgum and linden.
Four cutters that build a gingerbread house: two gables, a side wall and a roof panel, with the door and windows cut in the same press.
Six Christmas village cookie cutters with stamps: cottage, church, townhouse, fir tree, street lamp and wreath.
Six Hanukkah cookie cutters with stamps: menorah, dreidel, Star of David, oil jug, sufganiyah and gelt coin.
Six New Year's Eve cookie cutters with stamps: champagne bottle, glass, clock at midnight, firework, top hat and party popper.
Six safari cookie cutters with stamps: elephant, giraffe, lion, hippo, monkey and palm tree.
Six sports ball cookie cutters with stamps: soccer ball, basketball, baseball, American football, tennis ball and volleyball.
Six garden cookie cutters with stamps: sunflower, daisy, tulip, cherry blossom, watering can and bee.