◆ Print only
A tall gingerbread townhouse kit with heart windows and scalloped icing, printed flat and glued together.
Want your own version? Make it free in our christmas house tool. A free account gives you free downloads every week.
A narrow, tall gingerbread house as a printed kit: a front and a back, two side walls, two roof halves with scalloped icing like roof tiles and a four piece chimney, all flat panels in gingerbread brown with the white icing printed on top. The windows are cut out as hearts, dotted trim runs up the gables and little stars sit under the windows, so it glows over an LED tealight.
Made with our free Christmas house generator, not modelled by hand: we picked the Gingerbread kit, the Tall shape, heart windows, scalloped icing on the roof, dotted trim and stars on the walls. Everything else is the tool's default. The zip holds exactly what the tool exports: a 3MF with every panel on one plate in its colours, and each of the 10 panels as its own STL. Like every free download from the tool, it carries a small MESHCAST mark where it does not show.
Glue it together on an Advent afternoon, set an LED tealight inside so the heart windows glow, and stand it next to the cottage for a little street.
Shown as a 3D render of the printed house, glued together from its panels, not a photo.
Print the panels flat, icing up, as exported. On one nozzle, change filament at the height in the README for white icing.
Glue the two side walls between the front and the back, square on the table.
Glue the two roof halves on so they meet along the ridge.
Glue the four chimney pieces into a box and set it on the roof.
Put an LED tealight inside, never a real candle.
Print details
| Type | Print only |
|---|---|
| Printed parts | 10 |
| Size (W x D x H) | 66 x 60 x 143 mm |
| Print bed needed | 139 x 60 mm, 4 mm tall |
| Filament | ~90 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: 3MF in colour + 10 panel STLs + README |
| Added | 2026-11-03 |
Made with the free Christmas house generator. Upload your own drawing and get the same kind of part built from it, in your browser.
ZIP: 3MF in colour + 10 panel STLs + README
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
New to this? Read the tealight house guide.
Yes. Print this tall townhouse next to the cottage kit and a wide one from the same free tool: all three share the panel thickness and the icing height, so one filament change at the same layer works for every kit, and they stand together as a little gingerbread street.
About 4 h 15 min and 90 g of PLA at 0.2 mm layers, estimated from the files rather than sliced, so a current printer is often faster. The panels print flat with no supports; on a small printer, put the panel STLs on two plates.
Glued together it stands 66 by 60 mm and 143 mm tall. To change that, open the free Christmas house generator from this page and move the size sliders; the rest of the design follows, and you download the new file in a minute.
A flat five point star that says Merry Christmas, in red, white and gold, with a loop for the ribbon.
A flat ball ornament for a baby's first Christmas, in navy, white and silver, ready for the baby's name.
A round 80 mm bauble cut into crisp facets like ice, with a raised silver snowflake, printed in two halves.
An onion dome bauble with a twisting spiral and Noel in raised white script, printed in two halves.
A gingerbread house that never goes stale: flat panels with the icing printed on, glued together in an afternoon.
A little cottage with snow on the roof that glows over an LED tealight, printed in one piece.
A flat heart ornament for a couple's first Christmas together, in red, white and gold.
A flat Christmas tree ornament with the whole family on it, one name per branch, in green, white and red.