◆ Print only
A smooth navy drop bauble with a raised silver moose, a Nordic Christmas ornament printed in two halves.
Want your own version? Make it free in our bauble designer tool. A free account gives you free downloads every week.
A Nordic bauble: a smooth navy drop with a raised silver moose standing on the front, and a neck on top for a standard metal ornament cap. It looks best in silk or glossy PLA, which catches the tree lights like glass, and prints in two flat halves that line up on filament pins, with no supports anywhere.
Made with our free bauble designer, not modelled by hand: we picked the drop shape, the Smooth pattern and the moose motif with no name, in the navy and silver colour set. Everything else is the tool's default. The zip holds the 3MF exactly as the tool exports it for a free account, every part in its own colour; every current slicer opens it, and on a one-colour printer it prints in one colour. Like every free download from the tool, it carries a small MESHCAST mark where it does not show.
Print the two halves on their flat faces, push filament pins into one, glue the rims and fit a metal ornament cap in the neck. It hangs like a glass bauble and survives being dropped.
Shown as a 3D render of the printed bauble, its two halves put together, not a photo.
Print both halves on their flat cut faces, dome up, as exported. No supports.
Cut 5.5 mm pieces of 1.75 mm filament and push one into each pin hole of one half.
Put a thin line of superglue gel on the rim and press the halves together on the pins.
Fit a standard metal ornament cap into the neck and hang it.
Print details
| Type | Print only |
|---|---|
| Printed parts | 2 |
| Size (W x D x H) | 80 x 80 x 122 mm |
| Print bed needed | 168 x 122 mm, 42 mm tall |
| Filament | ~106 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: 3MF in colour + README |
| Added | 2026-11-03 |
Made with the free Bauble designer generator. Upload your own drawing and get the same kind of part built from it, in your browser.
ZIP: 3MF in colour + README
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
New to this? Read the bauble designer guide.
Silk PLA or a glossy PETG in navy, with a silk silver for the moose. The smooth drop has no pattern to hide the layer lines, so a shiny filament and 0.12 to 0.16 mm layers give the cleanest surface.
About 4 h 55 min and 106 g of PLA at 0.2 mm layers, estimated from the files rather than sliced, so a current printer is often faster. The two halves print side by side on their flat faces with no supports.
It is 80 by 80 mm and 122 mm tall. To change that, open the free bauble designer from this page and move the size slider; the rest of the design follows, and you download the new file in a minute.
A flat five point star that says Merry Christmas, in red, white and gold, with a loop for the ribbon.
A flat ball ornament for a baby's first Christmas, in navy, white and silver, ready for the baby's name.
A round 80 mm bauble cut into crisp facets like ice, with a raised silver snowflake, printed in two halves.
An onion dome bauble with a twisting spiral and Noel in raised white script, printed in two halves.
A gingerbread house that never goes stale: flat panels with the icing printed on, glued together in an afternoon.
A little cottage with snow on the roof that glows over an LED tealight, printed in one piece.
A flat heart ornament for a couple's first Christmas together, in red, white and gold.
A flat Christmas tree ornament with the whole family on it, one name per branch, in green, white and red.