◆ Print only
A wide log cabin with star shaped windows and snow on a green roof, glowing over an LED tealight.
Want your own version? Make it free in our christmas house tool. A free account gives you free downloads every week.
A wide mountain cabin for the Christmas village: warm brown walls with star shaped windows, a dark green roof under a thick layer of white snow and a chimney. Stand it over an LED tealight and every star lights up. It prints in one piece, standing up, with no supports.
Made with our free Christmas house generator, not modelled by hand: we picked the Tealight house, the Wide shape, star windows and snow on the roof, with the walls in a warm wood brown (#c98f5a) and the roof dark green (#2f4f3a). Everything else is the tool's default. The zip holds exactly what the tool exports: a 3MF with every part in its own colour, and the same print as one STL. Like every free download from the tool, it carries a small MESHCAST mark where it does not show.
Set it over an LED tealight on a windowsill or a mantelpiece, or next to the snowy cottage for a little village. The 3MF gives walls, roof and snow their own colours on a multicolour printer.
Shown as a 3D render of the printed house, as it comes off the bed, not a photo.
Print it standing on its open floor, as exported. No supports.
Clean any stringing out of the star windows and the door.
Set it over a battery LED tealight, never a real candle.
Print details
| Type | Print only |
|---|---|
| Printed parts | 1 |
| Size (W x D x H) | 92 x 68 x 82 mm |
| Print bed needed | 92 x 68 mm, 83 mm tall |
| Filament | ~48 g |
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed |
| Download | ZIP: 3MF in colour + STL + README |
| Added | 2026-11-03 |
Made with the free Christmas house generator. Upload your own drawing and get the same kind of part built from it, in your browser.
ZIP: 3MF in colour + STL + README
Free for personal use. Selling the printed piece itself needs a commercial licence (Pro or Founder); passing on the file is not permitted on any plan. Full terms.
New to this? Read the tealight house guide.
No. The tool shapes every window so its top edges stay within what a printer bridges or overhangs, and the cabin prints standing up in one piece. Print it in PLA at 0.2 mm and clean any stringing out of the stars afterwards.
About 2 h 15 min and 48 g of PLA at 0.2 mm layers, estimated from the files rather than sliced, so a current printer is often faster. It prints in one piece standing on its open floor, with no supports.
It is 92 by 68 mm and 82 mm tall. To change that, open the free Christmas house generator from this page and move the size sliders; the rest of the design follows, and you download the new file in a minute.
A flat five point star that says Merry Christmas, in red, white and gold, with a loop for the ribbon.
A flat ball ornament for a baby's first Christmas, in navy, white and silver, ready for the baby's name.
A round 80 mm bauble cut into crisp facets like ice, with a raised silver snowflake, printed in two halves.
An onion dome bauble with a twisting spiral and Noel in raised white script, printed in two halves.
A gingerbread house that never goes stale: flat panels with the icing printed on, glued together in an afternoon.
A little cottage with snow on the roof that glows over an LED tealight, printed in one piece.
A flat heart ornament for a couple's first Christmas together, in red, white and gold.
A flat Christmas tree ornament with the whole family on it, one name per branch, in green, white and red.