🎁 Maker projects · 9 min read

3D printed Christmas gifts: 12 personalized ideas you can make at home

By meshcast.app · Updated November 2026

This guide was drafted with AI assistance.

3D render of a flat green Christmas tree ornament with several family names raised in white, a personalized 3D printed Christmas gift
Family names Christmas tree ornament · free download →
Quick answer

The best 3D printed Christmas gifts are the ones with a name or a photo on them, because that is the part no shop can copy. Twelve that work, each made in a free browser tool: a name keychain, an I ♥ keychain, a photo lithophane, a name ornament, a round bauble, a mesh bauble, a name cookie cutter, an embosser or wax seal, a desk nameplate, a photo candle, a Christmas candle and a light-up house. The quick ones print in under an hour for a few cents of PLA; candles need a day for the mold.

Type a name, pick a shape, download a print-ready ornament. Free, in your browser.

Open the ornament maker →

All 12 personalized Christmas gifts at a glance

Times and filament below come from the matching designs in our library, sliced or estimated for a 0.4 mm nozzle at normal speeds. Where there is no library design, the figure is marked as a rough estimate. Filament cost assumes ordinary PLA at roughly $20 a kilo.

GiftToolPrint timeFilament
1. Name keychainKeychain15 to 35 min3 to 5 g
2. I ♥ NAME keychainI love keychainabout 30 minabout 5 g
3. Photo lithophaneLithophane2 to 5 h (estimate)15 to 50 g (estimate)
4. Name ornamentOrnament maker25 to 45 min10 to 16 g
5. Round bauble with a nameBauble designerabout 4.5 habout 95 g
6. Mesh baubleMesh formerabout 3 h with the pressabout 105 g with the press
7. Name cookie cutterCookie cutter40 to 60 min6 to 10 g
8. Embosser or wax sealEmbosser · Stamp35 min to 2 h8 to 22 g
9. Desk nameplateNameplate1 to 2 h (estimate)20 to 40 g (estimate)
10. Photo candlePhoto candlea day for the molda few hundred g
11. Christmas candleCandle mold5 to 15 h for the mold150 to 350 g
12. Light-up Christmas houseTealight houseabout 3 habout 67 g

Every tool gives you an STL, most also a 3MF with the colors as separate parts. Ready-made versions of many of these are in the free Christmas design collection, if you would rather print than design.

Quick gifts: under an hour each

1

A name keychain

The classic last-minute gift and the one everyone uses daily. In the keychain generator type a name (Enter starts a second line), pick one of the quick-start styles, and choose a raised-letter plate or a letter outline tag, where the shape of the word becomes the shape of the tag. About 15 to 35 minutes and 3 to 5 g: the library's Grandma keychain takes 17 minutes.

Personal touch: tick Add NFC sticker pocket, glue in a sticker, and the keychain opens a playlist, a video message or a shared photo album when a phone taps it.

2

An "I ♥ NAME" keychain

The souvenir mark with your own word under it, made in the I love keychain generator: a black plate, a white I and name, a red heart raised higher. Each color has its own band of height, so a single-nozzle printer does all three with two filament changes. About 30 minutes and 5 g, like the I ♥ DAD keychain.

Personal touch: not only names. A home town, the dog, a band, or two lines such as "MUM / & DAD".

3

A name ornament for the tree

The Christmas ornament maker has twelve flat shapes, from bauble, star and heart to stocking, reindeer, pet bone and paw. The name is sized to fill the face automatically, up to six lines fit for a whole family, and it hangs on a ribbon loop, stands as a place card or becomes a fridge magnet. 25 to 45 minutes and 10 to 16 g. Ready versions: baby's first Christmas, our first Christmas and a paw for the pet. Full walkthrough: personalized Christmas ornament.

Personal touch: the year on the last line. In ten years it is the ornament they look for first.

Photo gifts

4

A photo lithophane

The gift that makes people go quiet when you switch the light on. The lithophane generator turns a photo into a panel whose thickness follows the brightness, so the picture appears when light shines through it. Shapes: a flat rectangle, circle or heart, a curved panel, a lamp that wraps round an LED tea light, or a moon sphere. A circle or heart can get a hanging loop and become a photo ornament. Print it the way it opens in the slicer, in white PLA, 0.1 to 0.12 mm layers, 100% infill. Roughly 2 to 5 hours depending on size (our estimate).

Personal touch: crop tight on the faces before uploading. Formats, light sources and the gift-ready version: lithophane Christmas gift.

For the tree

5

A round bauble with a name

The bauble designer makes a real round bauble: a ball, drop, onion or cone, smooth or with ribs, spiral, facets or honeycomb, the name wrapped round the front and a motif such as a reindeer or snowflake above it. It prints as two halves with no supports and takes a standard metal ornament cap. About 4.5 hours and 95 g for an 83 mm bauble like the name and year bauble. Assembly tips: personalized Christmas bauble.

Personal touch: name in one color, bauble in another, with one filament change or the 3MF.

6

A mesh bauble

An open lattice ornament made with the mesh former: the net prints flat in minutes, then you warm it with a heat gun and press it into shape in a printed press. Two pressed halves close into a bauble, star or heart. The mesh Christmas ornament is about 3 hours and 105 g including the press, which you keep and reuse for the next one. How it works: mesh Christmas ornaments.

Personal touch: upload your own outline, a pet silhouette or an initial, as the shape.

For the kitchen and the desk

7

A name cookie cutter, with cookies

Give the cutter and a tin of the cookies it made. In the cookie cutter generator switch to Text and type a name: the cutter outlines the whole word and the letters become a stamp. Or upload a silhouette of the family dog. 40 to 60 minutes, 6 to 10 g. Shapes, stamps and food safety: Christmas cookie cutters.

Personal touch: print one large and one small (40 to 50 mm) of the same shape.

8

A paper embosser or a wax seal

For the person who still writes cards. The embosser generator makes a die pair with a monogram, a name or a logo, either with a print-in-place hinge or held by magnets; squeeze cardstock between the plates and the design stands out with no ink. The Merry Christmas embosser takes about 35 minutes. The stamp maker does wax seals: the Christmas wax seal set is six 28 mm faces and one screw-on handle, about 2 hours.

Personal touch: "From the library of" and their name for a book lover.

9

A desk nameplate

For a colleague, a new job or a child's door. The nameplate generator stacks as many text lines and symbols as you like on a plate, raised or engraved, and handles the mounting: keyhole slots, screw holes, a French cleat, or a desk wedge printed as a separate part. Plan on 1 to 2 hours for a typical desk sign (our estimate, it depends on size).

Personal touch: a job title or a joke on the second line, in a second color via the 3MF.

Candles and light

10

A photo candle

A wax candle that shows a photo when it is lit. The photo candle designer wraps the picture round a candle as a relief, then hands it to the two-part mold tool in one click. Pour pale, undyed wax: the flame backlights the wall and the photo appears. The mold is a long print, so start a few days before Christmas. Step by step: photo candle mold.

Personal touch: rotate the photo so the mold seam falls on the background, never across a face.

11

A Christmas candle from your own mold

Print a reusable mold, pour a batch of candles. The library has a Christmas tree taper, a puffy snowflake, a gift box and a gingerbread house, all made with the candle mold generator, which also builds a mold around any STL you upload. Molds take 5 to 15 hours and 150 to 350 g, and every pour after that is just wax. Temperatures, wicks and molds: homemade Christmas candles.

Personal touch: one mold, a different wax color for each person.

12

A light-up Christmas house

The tealight house maker builds a one-piece house that glows over an LED tea light: windows, door, chimney, brick or timber walls, snow on the roof and a name on the front. The snowy tealight house is about 3 hours and 67 g. The same tool makes a gingerbread house kit of flat panels with printed icing. More: 3D printed gingerbread house.

Personal touch: the family name over the door and the year in the gable. LED tea lights only: PLA softens around 60 °C.

Two colors from one nozzle

A second color is what makes a printed gift look bought rather than printed. You do not need an AMS for it. The keychain, the I love keychain, the ornament maker and the gingerbread kit all build each color as its own band of height:

  1. Slice the STL in the first color.
  2. Add a filament change (M600, or "pause / change filament" on the layer slider) at the height the tool shows.
  3. When the printer stops, load the second spool and resume.

With a multicolor printer, download the 3MF instead: the parts arrive with their colors already assigned. More tricks: multicolor 3D printing without an AMS.

Plan your print queue

The mistake every December is the same: starting the big prints on the 22nd. Work backwards from the day you hand them over.

Many names, one evening. Every tool rebuilds the moment you change the text, so you can download one file per person in a minute each. For a long list, the ornament maker can export every name as one ZIP (a Pro feature). Cheap ideas for office and classroom lists are in Secret Santa gifts you can 3D print.

Gifts and selling. Free downloads are for personal use and gifts and carry a small Meshcast mark. To sell what you print, at a Christmas market or online, you need Pro, which adds commercial rights and swaps the mark for your own logo.

Start with the one that takes 20 minutes

A name ornament for everyone on the list: pick a shape, type a name, download. Free, in your browser.

Open the ornament maker →

FAQ

What can I 3D print as a Christmas gift in an hour?

A name keychain (about 15 to 35 minutes), a flat name ornament (about 25 to 45 minutes), a cookie cutter (about 40 to 60 minutes) or a paper embosser for Christmas cards (about 35 minutes). All of them print flat with no supports, so they are also the safest last-minute prints.

Do I need a multicolor printer for two-color gifts?

No. The keychain, I love keychain, name ornament and gingerbread house tools all put each color in its own band of height. Slice in one color, add a filament change at the height the tool shows, and swap the spool when the printer pauses. The 3MF download keeps the colors as separate parts if you do have an AMS or MMU.

How much does a 3D printed Christmas gift cost to make?

Mostly cents. A keychain uses 3 to 5 g of filament and an ornament 10 to 16 g. A round bauble takes about 95 g and a candle mold 150 to 350 g, which is still a few dollars of PLA or PETG. Wax, wicks, LED tea lights and ribbon are the only other costs.

Which 3D printed gift is best for grandparents?

A photo lithophane. A grandchild's photo turns into a panel, a lamp shade or a round ornament that shows the picture when light shines through it. Print it in white PLA at 0.1 to 0.12 mm layers with 100% infill and give it with an LED tea light or a small LED panel.

Can I make the same gift for many people at once?

Yes. Most tools rebuild instantly when you change the name, so you download one file per person. The Christmas ornament maker can also export every name of a list as one ZIP with one file each, which is a Pro feature.

Can I sell the gifts I print?

Free downloads are for personal use and gifts and carry a small Meshcast mark. To sell what you print, for example at a Christmas market, you need Pro, which adds commercial rights and replaces the Meshcast mark with your own logo.

Made by meshcast.app. Made one of these for someone? Send a photo, we'd love to see it.